97.190 儿童用器具 标准查询与下载

GB/T 13433-1992 产品标准中有关儿童安全的要求

本标准规定了产品标准中有关儿童安全的基本要求。 本标准适用于编写儿童使用或易于接触的产品的标准。

Requirements for child safety in product standards

GSO EN 1930:2024 儿童使用及护理用品 安全护栏 安全要求和试验方法

This European Standard specifies the safety requirements and test methods for child safety barriers for domestic indoor use which are designed to be fitted across openings to limit a child's access inside the home and to prevent young children up to 24 months of age passing through. This European Standard does not apply to products designed to be fitted across windows.

Child use and care articles - Safety barriers - Safety requirements and test methods

T/CSTE 0246-2024 质量分级及“领跑者”评价要求 智能学习机

本文件规定了智能学习机产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划 分。 本文件适用于智能学习机产品质量分级及企业标准水平评价。相关机构开展质量分级和企业标准水平 评价、“领跑者”产品评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner — Smart learning machine

T/CSTE 0247-2024 质量分级及“领跑者”评价要求 点读笔和词典笔

本文件规定了点读笔和词典笔产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等 级划分。 本文件适用于点读笔和词典笔产品质量分级及企业标准水平评价。相关机构开展质量分级和企业标准 水平评价、“领跑者”产品评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner — Point reading pen and scanning dictionary pen

ASTM F2088-24 婴儿和摇篮秋千的消费者安全标准规范

Standard Consumer Safety Specification for Infant and Cradle Swings

GSO ASTM F977:2024 婴儿学步车标准消费者安全规范

  Scope is not provided for this standard

Standard Consumer Safety Specification for Infant Walkers

GSO EN 14344:2024 儿童护理用品 自行车用儿童座椅 安全要求和测试方法

This document specifies requirements for child seats intended to be mounted on cycles and electrical power assisted cycles with a cut off speed of up to 25 km/h (i.e. according to EN 15194), their attachment system and accessories intended to be attached to the seat in order to transport children with a weight from 9 kg up to 22 kg and who are capable of sitting unaided. NOTE 1 Some European countries have special legislation for child seats for cycles. Compliance with this document might not meet this legislation. NOTE 2 Where a child seat or any part of the child seat has several functions or can be converted into another function, other relevant standards might be applicable. NOTE 3 Additional rationales are presented in Annex E for inclusion of some of the requirements given in this document.

Child care articles - Child seats for cycles - Safety requirements and test methods

GSO EN 13209-1:2024 儿童护理用品 儿童背带 安全要求和测试方法 第1部分：框架式背带

This document specifies the safety requirements and test methods for child back carriers with framed support to carry a child in a seated position. Framed back carriers are intended for children from 6 months of age up to a maximum weight of 18 kg and are designed to carry the child on the carer’s back and be attached to a carer’s torso allowing a hands-free operation, e.g. standing, walking. NOTE The rationales for the inclusion of some of the requirements given in this document are given in Annex B. This document does not cover framed back carriers designed for children with special needs. If the framed back carrier has other functions not covered in this document, reference should be made to the relevant European Standard.

Child care articles - Child carriers - Safety requirements and test methods - Part 1: Framed back carrier

GSO ASTM F2088:2024 婴儿和摇篮秋千的标准消费者安全规范

  Scope is not provided for this standard

Standard Consumer Safety Specification for Infant and Cradle Swings

GSO EN 14960-3:2024 充气游乐设备 第3部分：snappies 的附加安全要求和测试方法

This part of EN 14960 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively. This part of EN 14960 specifies additional safety requirements for snappies for which the primary activities are climbing and sliding. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This part of the EN 14960 specifies requirements to protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This part of the EN 14960 is not applicable to inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.

Inflatable play equipment - Part 3: Additional safety requirements and test methods for snappies

GSO EN 14960-2:2024 充气游乐设备 第2部分：用于永久安装的充气弹跳枕的附加安全要求

This part of EN 14960 specifies additional safety requirements for inflatable bouncing pillows intended for permanent installation. This part of EN 14960 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively. This part of EN 14960 specifies safety requirements for inflatable play equipment for which the primary activity is bouncing. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This part of EN 14960 specifies the requirements that will protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This part of EN 14960 is not applicable to inflatables dealt with in EN 14960 1:2019, inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.

Inflatable play equipment - Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation

GSO ISO 31110:2024 带轮儿童运输工具 婴儿车和婴儿车 要求和测试方法

This document specifies the safety requirements and test methods for pushchairs and prams, intended for the transportation of one or more children up to three years of age. This document does not apply to toys, pushchairs intended for sport use, pushchairs and prams propelled by a motor, and pushchairs and prams designed for children with special needs. Other relevant standard(s) can apply if any when a pushchair or pram or any part of the pushchair or pram has several functions or can be converted into another function. NOTE The average weight of a three-year-old child corresponds to 15 kg.

Wheeled child conveyances — Pushchairs and prams — Requirements and test methods

ASTM F3084-23 婴儿和婴幼儿摇椅的标准消费者安全规范

1.1  This consumer safety specification covers establishment of requirements, test methods, and marking requirements to promote safe use of the rocker by an occupant and a caregiver. 1.2  This specification does not cover rockers intended for toddler only use without a restraint system, hand-held infant carriers, or sleep products that have the ability to rock or have a rocking mode. 1.3  This consumer safety specification is intended to minimize the risk of injury to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of an infant or infant/toddler rocker. 1.4  No rocker produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5  This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons with the occupant in the product or the incidents resulting from abuse or misuse by other children. 1.6  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7  The following precautionary caveat pertains only to the test methods portion, Section 7 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers

T/CSTE 0549-2024 质量分级及“领跑者”评价要求 儿童自行车

本文件规定了儿童自行车产品质量分级及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分。 本文件适用于儿童自行车产品质量分级及企业标准水平评价。相关机构开展质量分级和企业标准水平评价、“领跑者”产品评价以及相关认证或评价时可参照使用，相关企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner — Bicycles for young children

T/QGCML 2915-2023 儿童乘用自行车拖车

本文件规定了儿童乘用自行车拖车（以下简称“拖车”）的技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于最多可运输两个被动的儿童乘坐者（任何一个的最大体重不超过22 kg），且儿童应能自行坐立，最大允许重量（包括乘坐者）不超过60 kg的自行车拖车。 注：不适用于拖车自行车(运送一个或两个踩自行车踏板的乘坐者，通常为儿童，带有可连接在自行车后的连接装置)和用于专业使用或带有一个轮子(单轨拖车)用于运输除儿童以外负重的拖车。

Children's passenger bicycle trailer

BS EN 1888-2:2018+A1:2022 儿童护理用品 轮式儿童交通工具 适合 15 公斤以上至 22 公斤儿童的婴儿车

Child care articles. Wheeled child conveyances - Pushchairs for children above 15 kg up to 22 kg

T/XTKCY 003-2023 儿童坐姿矫正器

本标准规定了儿童坐姿矫正器的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于为儿童坐姿起预防、纠正作用所设计及生产出来的矫正器

Children's sitting posture corrector

T/CASME 856-2023 婴儿电动摇椅性能检验规程

本文件规定了婴儿电动摇椅产品的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Performance inspection procedures for infant electric rocking chairs

23/30478228 DC BS EN 1930 儿童护理用品 安全屏障 安全要求及测试方法

BS EN 1930 Child care articles. Safety barriers. Safety requirements and test methods

23/30472309 DC BS EN 71-19 玩具安全 第19部分：玩具材料中双酚 A 的迁移

BS EN 71-19 Safety of toys - Part 19. Migration of bisphenol A from toy materials