97.190 儿童用器具 标准查询与下载

22/30452956 DC BS EN 16232 AMD 2. 儿童使用和护理用品 婴儿秋千

BS EN 16232 AMD 2. Child use and care articles. Infant swings

ASTM F1004-22 扩展门和可扩展外罩的消费者标准安全规范

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and expandable enclosures. 1.2 Products known as expansion gates and expandable enclosures, or by any other name, which are in the scope of this consumer safety specification are intended for young children aged six months through 24 months, and are defined in Section 3. 1.3 Expansion gates and expandable enclosures defined in Section 3 are for domestic use and are not to be confused with other types of gates or enclosures that may be specifically designed for commercial, institutional, agricultural, pet use, or any other such use. 1.4 No expansion gate or expandable enclosure as defined in Section 3, that is, produced after the approval date of this consumer safety specification either by label or other means, shall indicate compliance with this specification unless it conforms to all the requirements contained herein. 1.5 For expediency, expansion gates and expandable enclosures as defined in Section 3 will heretofore be referred to in this consumer safety specification as “gates” and “enclosures” unless referred to definitively. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.11 on Bed Rails. Current edition approved June 1, 2022. Published July 2022. Originally approved in 1986. Last previous edition approved in 2021 as F1004 – 21. DOI: 10.1520/ F1004-22. *A Summary of Changes section appears at the end of this standard Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

T/SZBX 065-2022 便携式婴幼儿推车

本文件规定了便携式婴幼儿推车的分类、要求、试验方法、检验规则、标志、使用说明、包装、运输和贮存。

Portable baby stroller

GSO ASTM F2951:2022 婴儿监视器的标准消费者安全规范

This consumer safety specification addresses incidents associated with corded baby monitors that were identified by the U.S. Consumer Product Safety Commission (CPSC), including strangulations as a result of entanglement in cords. It establishes requirements for corded baby monitors, including audio monitors, video monitors, and motion sensor monitors. It also provides requirements for labeling, instructional material and packaging, and is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of baby monitors. This specification also addresses calibration and standardization, general requirements, test methods, product marking and labeling, and instructional literature.

Standard Consumer Safety Specification for Baby Monitors

GSO EN 12227:2022 家用婴儿围栏安全要求和测试方法

This European Standard specifies the safety requirements and test methods for playpens and folding playpens for domestic use, for a child with a body weight up to 15 kg. If a playpen has several functions or can be converted into another function, it shall comply with the relevant standards.

Playpens for domestic use - Safety requirements and test methods

GSO ASTM F406:2022 非全尺寸婴儿床/游戏床的标准消费者安全规范

1.1 This consumer safety specification establishes testing requirements for structural integrity and performance requirements for non-full-size cribs/play yards, both rigid sided and mesh/fabric assemblies. It also provides requirements for labeling and instructional material. The term unit or product will refer to a non-full-size crib/play yard. 1.2 This specification covers a framed enclosure with a floor made for the purpose of providing sleeping and playing accommodations for a child who cannot climb out and is less than 35 in. (890 mm) in height. It also covers bassinet, changing table, or similar accessories to a non-full size crib/play yard. These accessories shall also comply with the applicable requirements of ASTM standards addressing those accessories. For example, a changing table that attaches to a play yard shall also comply with the applicable requirements in Specification F2388. This specification does not cover inflatable products. 1.3 No product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards

GSO EN 1273:2022 儿童护理用品 婴儿学步架 安全要求和测试方法

This document specifies safety requirements and test methods for baby walking frames into which a child is placed, and intended to be used from when the child is able to sit up by itself until the child is able to walk by itself. This document does not apply to baby walking frames for therapeutic and curative purposes and to those baby walking frames relying on inflatable parts to support the child. Toys (e.g. ride on toys, push-along toys, usually intended for children able to walk unaided) are not covered by this document. If a baby walking frame has several functions or can be converted into another function the relevant European standards apply to it.

Child care articles - Baby walking frames - Safety requirements and test methods

GSO EN 14350:2022 儿童保育用品.饮水设备.安全要求和测试方法

This document specifies safety requirements relating to the materials, construction, performance, packaging and product information for drinking equipment intended for children of 0 to 48 months (see B.2) of age: — Re-usable containers and re-usable drinking accessories; — Single-use containers and drinking accessories sold with these containers; — Single-use feeding teats; — Ready to use feeding teats. This document does not include requirements for the cleanliness of ready to use and single use products. This document does not apply to products designed for specialist clinical medical applications, e.g. those relating to cleft lip palates. This document does not apply to drinking equipment made from ceramics. This document does not apply to bags intended for storage only. This document does not apply to drinking equipment which is supplied with fluids or food when purchased and to feeding accessories fixed to it. This document is not applicable to soothers. Safety requirements and test methods for soothers are specified in EN 1400 [6]. This document is not applicable for cutlery and other feeding utensils. Safety requirements and test methods for Cutlery and other feeding equipment are specified in EN 14372 [7]. For drinking equipment excluded from the scope, consider the applicable requirements of this document whenever possible.

Child care articles - Drinking equipment - Safety requirements and test methods

ASTM F2167-22 婴儿弹跳座椅的标准消费者安全规范

1.1 This consumer safety specification covers establishment of requirements, test methods, and marking requirements to promote safe use of an infant bouncer seat by an occupant and a caregiver. 1.2 For purposes of this consumer safety specification, an infant bouncer seat is a freestanding product intended to support an occupant in a reclined position to facilitate bouncing by the occupant, with the aid of a caregiver or by other means. Intended occupants are infants who have not developed the ability to sit up unassisted (approximately 0 to 6 months of age). 1.3 This consumer safety specification is intended to minimize the risk of injury to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of an infant bouncer seat. 1.4 No infant bouncer seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons with the occupant in an infant bouncer seat or the incidents resulting from abuse or misuse by other children. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant Bouncer Seats

ASTM F3084-22 婴儿和婴儿/幼儿摇椅的标准消费者安全规范

1.1 This consumer safety specification covers establishment of requirements, test methods, and marking requirements to promote safe use of the rocker by an occupant and a caregiver. 1.2 This specification does not cover rockers intended for toddler only use without a restraint system, hand-held infant carriers, or sleep products that have the ability to rock or have a rocking mode. 1.3 This consumer safety specification is intended to minimize the risk of injury to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of an infant or infant/toddler rocker. 1.4 No rocker produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons with the occupant in the product or the incidents resulting from abuse or misuse by other children. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers

ASTM F2088-22 婴儿和摇篮秋千的标准消费者安全规范

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to infants presented by swings as identified in the introduction. 1.2 This consumer safety specification is intended to minimize the risk of injuries to infants resulting from normal use and reasonably foreseeable misuse or abuse of swings. It is not intended to address all incidents and injuries resulting from the interaction of other persons with the infant in the swing. 1.3 This consumer safety specification covers products with a powered mechanism used for the purpose of providing a swinging or gliding seat in any direction relative to the frame (that is, front to back, side to side, arc, etc.) for an infant. The powered mechanism can be through batteries, AC adapter, wind-up mechanism, or other means. This specification does not cover products that are intended to provide sleeping accommodations for the occupant. 1.4 No swing produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant and Cradle Swings

CEN/TR 16411:2022 儿童护理用品 CEN/TC 252 标准的汇编解释

The purpose of this CEN Technical Report is to provide replies to requests for interpretations and clarifications of: — EN 1273:2005, Child use and care articles — Baby walking frames — Safety requirements and test methods; — EN 1888:2012, Child care articles — Wheeled child conveyances — Safety requirements and test methods; — EN 1888-1:2018, Child care articles - Wheeled child conveyances - Part 1: Pushchairs and prams; — EN 1930:2011, Child use and care articles — Safety barriers — Safety requirements and test methods; — EN 12586:2007, Child use and care articles — Soother holder — Safety requirements and test methods; — EN 12790:2009, Child use and care articles — Reclined cradles; — EN 12221 1:2008, Changing units for domestic use — Part 1: Safety requirements; — EN 12221 2:2008, Changing units for domestic use — Part 2: Test methods; — EN 1466:2004+A1:2007, Child care articles — Carry cots and stands — Safety requirements and test methods; — EN 14350 2:2004, Child use and care articles — Drinking equipment — Part 2: Chemical requirements and tests; — EN 1400:2013+A1:2014, Child use and care articles — Soothers for babies and young children; — EN 14372:2004, Child use and care articles — Cutlery and feeding utensils — Safety requirements and tests; — EN 16120:2012, Child use and care articles — Chair mounted seat; — EN 16120:2012+A2:2016, Child use and care articles — Chair mounted seat; — EN 14350-1:2004, Child use and care articles — Drinking equipment - Part 1: General and mechanical requirements and tests; — EN 16232:2013, Child use and care articles — Infant swings. — EN 17022:2018, Child care articles - Bathing aids - Safety requirements and test methods; — EN 17072:2018, Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods; — EN 12586:2007+A1:2011, Child care articles - Soother holder – Safety requirements and test methods; — EN 14350:2020, Child care articles – Drinking equipment - Safety requirements and test methods; — EN 13209-1:2004, Child use and care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriers; — EN 13209-1:2021, Child care articles - Child carriers - Safety requirements and test methods - Part 1: Framed back carrier.

Child care articles - Compiled interpretations of CEN/TC 252 standards

T/CAB 0143-2022 儿童平衡车安全技术规范

主要包括儿童平衡车的术语和定义、技术要求、试验方法、标识和使用说明等。

Safety technical specification for children`s balance bike

ASTM F2907-22 吊索托架的标准消费者安全规范

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of sling carriers. 1.2 This consumer safety specification is intended to minimize the risk of injury to an occupant from the normal use and reasonably foreseeable misuse of products. 1.3 For purposes of definition, a sling carrier is a product of fabric or sewn fabric construction, which is designed to contain up to two (2) children in an upright or reclined position while being supported by the caregiver’s torso. Sling carriers are normally used from full-term birth to 35 lb (15.9 kg) unless the manufacturer indicates that a higher weight limit is allowed. NOTE 1—Slings consist of a variety of unstructured designs ranging from a hammock-shaped product suspended on the caregiver’s upper torso to a long length of material wrapped around the caregiver’s body. 1.4 The sling carrier is normally “worn” by the caregiver, and thus the child is supported from one or both shoulders of the caregiver. These products are worn on the front, hip or back of the caregiver, with the child either facing towards or away from the caregiver or reclined on the front only of the caregiver. 1.5 No sling carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein. 1.6 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and child while the sling carrier is in use. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Sling Carriers

ASTM F2549-22 框架儿童托架的标准消费者安全规范

1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of frame child carriers. 1.2 This consumer safety specification is intended to minimize the risk of injury to a child from the normal use and reasonably foreseeable misuse of these products. 1.3 For the purposes of this consumer safety specification, a frame child carrier is a product, normally of sewn fabric construction on a tubular metal or other frame, which is designed to carry a child, in an upright position, on the back of the caregiver. A frame child carrier is intended for use with a child that is able to sit upright unassisted and weighs between 16 lb and 50 lb (7.3 kg and 22.7 kg). The frame child carrier is intended to be worn on the back of the caregiver’s body, with the carrier, and thus the child, suspended from both shoulders of the caregiver. The seated position of the child is either facing towards or away from the caregiver. 1.4 No frame child carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein. 1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and child while the frame child carrier is in use. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Frame Child Carriers

T/ZZB 2631-2022 儿童脚踏卡丁车

本文件规定了儿童脚踏卡丁车（以下简称“卡丁车” ）的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于3-14周岁儿童乘骑玩耍的脚踏卡丁车。

Kids’ pedal-karts

22/30449503 DC BS EN 17826 儿童护理用品 化学危险 要求及测试方法

BS EN 17826. Child care articles. Chemical hazards. Requirements and test methods

SN/T 5435-2022 婴幼儿软背带（袋）通用技术要求

General technical requirements for infant soft carriers (bags)

T/PWSBZ 0001-2022 儿童自行车安全要求

本标准适用于四岁至十岁的儿童骑行的儿童自行车（鞍座高度在435mm和635mm之间）。这类自行车不能用于公路骑行，因此不应推定它须要具有适用于作公路骑行装备（鞍座高度小于435mm的玩具自行车应符合GB6675《国家玩具安全技术规范》的要求）。 凡符合本标准要求的儿童自行车就不是玩具自行车，因此也不属于玩具安全的范畴。

Children's Bicycle Safety Requirements

T/PWSBZ 0002-2022 儿童滑行平衡车安全要求

本标准适用于18个月至72个月的儿童骑行的儿童滑行平衡车。这类滑行平衡车不能用于公路骑行，也不适用于进行特技骑行的儿童滑行平衡车，因此不应推定它须要具有适用于作公路骑行用的装备。

Safety requirements for children's sliding balance car