L53 半导体发光器件 标准查询与下载

JIS C 5943:2010 录放用激光二极管测量方法

This Standard specifies the measuring methods of the electrical and optical characteristics of laser diodes for recording and playback used as the optical source (excluding those accommodated in electronic circuit or those accommodated in optical element).

Measuring methods of laser diodes used for recording and playback

JIS C 5942:2010 录放用激光二极管总则

This Standard specifies general matters such as terms, symbols, classification and performances of laser diodes for recording and playback used as the light source (excluding those accommodated in electronic circuit or those accommodated in optical element).

General rules of laser diodes used for recording and playback

DIN EN 62341-5:2010 有机发光二极管(OLED)显示器.第5部分:环境监测方法 (IEC 62341-1-5-2009); 德文版本 EN 62341-5-2009

This standard defines test methods for evaluating environmental endurance of organic light emitting diode display module.

Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods (IEC 62341-5:2009); German version EN 62341-5:2009

DIN EN 62341-1-1:2010 有机发光二极管(OLED)显示器.第1-1部分:通用规范 (IEC 62341-1-1-2009); 德文版本 EN 62341-1-1-2009

This part of IEC 62341 is a generic specification for organic light emitting diode (OLED) displays. It defines general procedures for quality assessment to be used in the IECQ-CECC system and establishes general rules for methods of electrical and optical measurements, environmental and mechanical tests and endurance tests.

Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications (IEC 62341-1-1:2009); German version EN 62341-1-1:2009

BS EN 62341-1-2:2009 有机发光二极管显示器.术语与文字符号

This part of IEC 62341 gives preferred terms, their definitions and symbols for organic light emitting diode (OLED) displays; with the object of using the same terminology when publications are prepared in different countries.

Organic light emitting diode displays - Terminology and letter symbols

BS EN 62341-5:2009 有机发光二极管(OLED)显示器.环境试验方法

This part of IEC 62341 defines testing methods for evaluating environmental endurance of organic light emitting diode display modules (OLED display modules) for use and storage under the assumed usage environment.

Organic light emitting diode (OLED) displays - Environmental testing methods

IEC 62341-5:2009 有机发光二极管(OLED)显示器.第5部分:环境监测方法

This part of IEC 62341 defines testing methods for evaluating environmental endurance of organic light emitting diode display modules (OLED display modules) for use and storage under the assumed usage environment.

Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods

BS EN 62007-2:2009 光纤系统用半导体光电器件.测量方法

Semiconductor optoelectronic devices for fibre optic system applications - Measuring methods

BS EN 62341-1-1:2009 有机发光二极管(OLED)显示器.一般规范

This part of IEC 62341 is a generic specification for organic light emitting diode (OLED) displays. It defines general procedures for quality assessment to be used in the IECQ-CECC system and establishes general rules for methods of electrical and optical measurements, environmental and mechanical tests and endurance tests.

Organic light emitting diode (OLED) displays - Generic specifications

IEC 62341-6-1:2009 有机发光二极管(OLED)显示器.第6-1部分:光学参数及光电学参数的测量方法

This part of IEC 62341 specifies the standard measurement conditions and measuring methods for determining optical and electro-optical parameters of organic light emitting diode (OLED) display modules@ and where specified@ OLED display panels@ in the following areas: a) luminance and uniformity; b) dark room contrast ratio; c) chromaticity@ colour uniformity@ colour gamut and white field correlated colour temperature; d) power consumption.

Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters

IEC 62341-1-1:2009 有机发光二极管(OLED)显示器.第1-1部分:通用规范

This part of IEC 62341 is a generic specification for organic light emitting diode (OLED) displays. It defines general procedures for quality assessment to be used in the IECQ-CECC system and establishes general rules for methods of electrical and optical measurements@ environmental and mechanical tests and endurance tests.

Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications

SANS 62031:2008 普通照明用LED模块.安全规范

Specifies general and safety requirements for light-emitting diode (LED) modules, i.e. LED modules without integral control gear for operation under constant voltage, constant current or constant power, and self-ballasted LED modules for use on d.c. supp

LED modules for general lighting - Safety specifications

SANS 62384:2008 LED模块的直流及交流电子控制装置.性能要求

Specifies performance requirements for electronic control gear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an output frequency which can deviate from the supply frequency, associated with LED modules accord

DC or AC supplied electronic control gear for LED modules - Performance requirements

UL 8750 BULLETIN-2008 灯具产品用发光二极管光源的调查纲要

The following is being proposed for preliminary review and comment only: 1. For Preliminary Review Only: Proposed First Edition of the Standard for Light Emitting Diode (LED) Light Sources for Use in Lighting Products, UL 8750

OUTLINE OF INVESTIGATION FOR LIGHT EMITTING DIODE (LED) LIGHT SOURCES FOR USE IN LIGHTING PRODUCTS

JB/T 10875-2008 发光二极管光学性能测试方法

本标准规定了再额定电流工作条件下的半导体发光二极管（以下简称LED器件）光学性能测试方法。 本标准适用于单色可见光、白光LED器件光学性能测试，组件和功率器件的光学性能测试参照执行。 本标准是一种推荐性的测试方法，只要达到同样的测试目的，也可采用其他的测试方法。

Measuring methods for optical properties of LEDs

SJ 20986-2008 体波声光器件通用规范

本规范规定了军用体波声光器件的通用要求、质量保证规定、测试和试验方法等。 本规范适用于军事装备用声光调制器、声光偏转器、声光滤光器、声光移频器和声光Q开关等体波声光器件（以下简称产品）。

General specification for bulk acoustoptic device

JEDEC J-STD-020D.1-2008 用于不气密固态表面安装设备的湿度/回流灵敏度分级

This classification procedure applies to all nonhermetic solid state Surface Mount Devices (SMDs) in packages, which, because of absorbed moisture, could be sensitive to damage during solder reflow. The term SMD as used in this document means plastic encapsulated surface mount packages and other packages made with moisture-permeable materials. The categories are intended to be used by SMD producers to inform users (board assembly operations) of the level of moisture sensitivity of their product devices, and by board assembly operations to ensure that proper handling precautions are applied to moisture/reflow sensitive devices. If no major changes have been made to a previously qualified SMD package, this method may be used for reclassification according to 4.2. This standard cannot address all of the possible component, board assembly and product design combinations. However, the standard does provide a test method and criteria for commonly used technologies. Where uncommon or specialized components or technologies are necessary, the development should include customer/manufacturer involvement and the criteria should include an agreed definition of product acceptance. SMD packages classified to a given moisture sensitivity level by using Procedures or Criteria defined within any previous version of J-STD-020, JESD22-A112 (rescinded), or IPC-SM-786 (rescinded) do not need to be reclassified to the current revision unless a change in classification level or a higher peak classification temperature is desired. Annex B provides an overview of major changes from Revision C to Revision D of this document. Note: If the procedures in this document are used on packaged devices that are not included in this specification’s scope, the failure criteria for such packages must be agreed upon by the device supplier and their end user.

Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices

IEC 62341-1-2:2007 有机发光二极管显示器.第1-2部分:术语和文字符号

This part of IEC 62341 gives preferred terms, their definitions and symbols for organic light emitting diode (OLED) displays; with the object of using the same terminology when publications are prepared in different countries.

Organic light emitting diode displays - Part 1-2: Terminology and letter symbols

KS C IEC 62341-6:2007 有机发光二极管(OLED)显示器.第6-1部分:光学参数及光电学参数的测量方法

이 규격은 유기발광다이오드 디스플레이 패널 및 모듈의 광학 및 광전기적 특성을 결정하기 위

Organic light emitting diode(OLED) displays－Part 6：Measurement methods

KS C IEC 62341-5:2007 有机发光二极管(OLED)显示器.第5部分:环境监测方法

이 규격은 OLED 표시장치의 환경 신뢰성 및 기계적인 신뢰성 및 품질 약화에 대한 신뢰성

Organic light emitting diode(OLED) displays－Part 5：Environmental and mechanical reliability test methods