27.220 热回收、绝热 标准查询与下载

GB/T 1028-2000 工业余热术语、分类、等级及余热资源量计算方法

本标准定义了工业余热及其回收利用设备的术语，规定了工业余热资源的分类、等级及余热资源量计算方法。本标准适用于有余热资源的工业企业和其他相关领域。

Terms, classification, grade of waste heat in industry and calculating method of quanity of waste heat resources

GB/T 4272-1992 设备及管道保温技术通则

本标准规定了有关保温材料及其制品的性能、保温设计、保温工程的施工与验收、保温效果的测试与评价等的原则要求。 本标准适用于动力、采暖、供热及一般用热部门。

General principles for thermal insulation technique of equipments and pipes

T/HEBQIA 251-2024 闭式冷凝水回收装置

本文件规定了闭式冷凝水回收装置的型号及基本参数、要求、试验方法、检验规则、交货及验收、标志、包装、运输及贮存、产品随机文件。

Closed condensate recovery device

T/CSHB 0001-2024 《上升管余热回收装置生产技术规范》

本文件规定了上升管余热回收装置的分类型式、技术要求、试验方法、检验规则、包装、运输、贮存。

Technical Specifications for the Production of Rising Pipe Waste Heat Recovery Devices

T/CSHB 0002-2024 《上升管余热回收装置质量控制规范》

本文件规定了上升管余热回收装置质量控制检测的要求,描述了对应的证实方法。

Quality Control Specifications for Rising Pipe Waste Heat Recovery Devices

BS ISO 6324:2024 保温隔热产品 适用于工业应用的柔性微孔绝缘材料 规格

Thermal insulation products. Flexible microporous insulation for industrial applications. Specification

T/CIECCPA 064-2023 天然气工业锅炉烟气热能利用技术规程

本文件规定了天然气工业锅炉烟气热能回收装置与系统要求，烟气热能回收系统监测、施工与质量验收、运行维护和异常情况处理的要求。

Technical specifications for thermal energy utilization of flue gas in natural gas industrial boilers

ASTM F683-23a 管道和机械绝热材料的选择和应用的标准实施规程

Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

T/QGCML 2332-2023 高效余热回收定型机

本文件规定了高效余热回收定型机的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于高效余热回收定型机的生产和检验。

Efficient waste heat recovery shaping machine

T/CASME 964-2023 蒸汽冷凝水及二次蒸汽回收技术要求

本文件规定了蒸汽冷凝水及二次蒸汽回收的术语和定义、回收原则、使用条件、装置要求、装配要求、安装验收、质量承诺、标志、包装、运输和贮存技术内容。

Technical requirements for steam condensate and secondary vapor recovery

ASTM C680-23a 用计算机程序估算绝热平面、圆柱形和球形系统的热增益或热损失和表面温度的标准实施规程

Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

DB41/T 2542-2023 燃气锅炉烟气余热回收利用技术规范

Technical specifications for recovery and utilization of flue gas waste heat from gas boilers

ASTM C488-16(2023) 隔热饰面外部暴露试验的标准试验方法

Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

ASTM C1289-23a 饰面硬质多孔聚异氰脲酸酯隔热板的标准规范

Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

ASTM C461-23 绝热用胶粘剂和涂层的标准试验方法

Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

ASTM C795-08(2023) 与奥氏体不锈钢接触用绝热材料标准规范

1.1 This specification covers non-metallic thermal insulation for use in contact with austenitic stainless steel piping and equipment. In addition to meeting the requirements specified in their individual material specifications, issued under the jurisdiction of ASTM Committee C16, these insulations must pass the preproduction test requirements of Test Method C692, for stress corrosion effects on austenitic stainless steel, and the confirming quality control, chemical requirements, when tested in accordance with the Test Methods C871. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

ASTM F683-23 管道和机械用隔热材料的选择和应用的标准实施规程

1.1 This practice covers the selection of types and thicknesses of thermal insulation materials for piping, machinery, and equipment for nonnuclear shipboard applications within the temperature ranges specified in Tables 1-16. Methods and materials for installation, including lagging, are also detailed. 1.2 This practice addresses operating temperatures from a low of –20 °F (–29 °C) up to 1200 °F (649 °C). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

ASTM C1289-23 表面硬质多孔聚异氰脲酸酯隔热板的标准规范

1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between −40 and 200°F (−40 and 93°C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications, the actual temperature limits shall be agreed upon by the manufacturer and the purchaser. 1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as nonstructural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes, users should follow specific product information provided by board manufacturers regarding physical properties, system design considerations and installation recommendations. NOTE 1—See Appendix X1 for guidance on determining wind pressure resistance of panels when required for wall sheathing applications. 1.3 The use of thermal insulation materials covered by this specification is typically regulated by building codes, or other agencies that address fire performance. Where required, the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. NOTE 2—For conversion to metric units other than those contained in this standard, refer to IEEE/ASTM SI 10. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

ASTM C665-23 轻型框架结构和预制房屋矿物纤维毯隔热标准规范

1.1 This specification covers the composition and physical properties of mineral-fiber blanket insulation used to thermally or acoustically insulate ceilings, floors, and walls in light frame construction and manufactured housing. The requirements cover fibrous blankets and facings. Values for water-vapor permeance of facings are suggested for information that will be helpful to designers and installers. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

ISO/DIS 6324 绝热产品 工业应用柔性微孔绝热材料 规范

Thermal insulation products — Flexible microporous insulation for industrial applications — Specification