13.060.10 天然水资源 标准查询与下载

SANS 10299-8:2003 地下水资源的开发，维护和管理．第8部分：水井钻孔的管理

Covers the overall strategy requirements for the regular monitoring, inspection and maintenance for water production purposes. Does not, however, cover the requirements for the monitoring, inspection and general systems maintenance of boreholes drilled f

Development, maintenance and management of groundwater resources Part 8: The management of water boreholes

SL 286-2003 地下水超采区评价导则

本导则适用于：划定地下水超采区的范围，对地下水超采区进行分类和分级，对地下水超采区进行动态监测、调查、评价和资料整编。

Guidelines for the assessment of zones of groundwater overdraft

AWWA M21-2003 地下水.第3版

This standard describes the essential requirements for the effective protection of source waters.

Groundwater Third Edition

ASTM D5730-02 以土壤、岩石、包气带和地下水为重点的环境用场地特性的标准指南

1.1 This guide covers a general approach to planning field investigations that is useful for any type of environmental investigation with a primary focus on the subsurface and major factors affecting the surface and subsurface environment. Generally, such investigations should identify and locate, both horizontally and vertically, significant soil and rock masses and ground water conditions present within a given site area and establish the characteristics of the subsurface materials by sampling or in situ testing, or both. The extent of characterization and specific methods used will be determined by the environmental objectives and data quality requirements of the investigation. This guide focuses on field methods for determining site characteristics and collection of samples for further physical and chemical characterization. This guide does not address special considerations required for characterization of karst and fractured rock terrane. In such hydrogeologic settings refer to Quinlan and Guide D 5717, (1).1.2 This guide refers to ASTM standard methods by which soil, rock, vadose zone, and ground water conditions may be determined. Laboratory testing of soil, rock, and ground-water samples is specified by other ASTM standards which are not specifically discussed in this guide. Laboratory methods for measurement of physical properties relevant to environmental investigations are included in Appendix X1.1.3 The values stated in SI units are to be regarded as the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Ground Water

ASTM D6771-02 地下水质探测用井和装置的低流量净化和取样的标准实施规程

1.1 This practice covers the method for purging and sampling wells and devices used for ground-water quality investigations and monitoring programs known as low-flow purging and sampling. This method is also known by the terms minimal drawdown purging or low-stress purging. This method could be used for other types of ground-water sampling programs but these uses are not specifically addressed in this practice.1.2 This practice applies only to wells sampled at the wellhead.1.3 This practice does not address sampling of wells containing either light or dense non-aqueous-phase liquids (LNAPLs or DNAPLs).1.4 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project''s many unique aspects. The word "standard" in the title means that the document has been approved through the ASTM consensus process.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations

SNI 19-6728.1-2002 资源平衡表编订. 第1部分:水资源空间

Resource balance compiling - Part 1: Spacial water resources

ASTM D6724-01 直推式地下水监测井安装的标准指南

1.1 This guide describes various direct push ground water monitoring wells and provides guidance on their selection and installation for obtaining representative ground water samples and monitoring water table elevations. Direct push wells are used extensively for monitoring ground water quality in unconsolidated formations. This guide also includes discussion of some groundwater sampling devices which can be permanently emplaced as monitoring wells.1.2 This guide does not address the single event sampling of ground water using direct push water samplers as presented in Guide D 6001. The methods in this guide are often used with other tests such as direct push soil sampling (Guide D 6282) and the cone penetrometer test (Guide D 6067). The present guide does not address the installation of monitoring wells by rotary drilling methods such as those presented in Practice D 5092. Techniques for obtaining ground water samples from monitoring wells are covered in Guide D 4448.1.3 The installation of direct push ground water monitoring wells is limited to unconsolidated soils and sediments including clays, silts, sands, and some gravels and cobbles. Penetration may be limited, or damage may occur to equipment, in certain subsurface conditions; some of which are discussed in . Information in this guide is limited to ground water monitoring in the saturated zone.1.4 This guide does not purport to comprehensively address all of the methods and issues associated with monitoring well installation. Users should seek input from qualified professionals for the selection of proper equipment and methods that would be the most successful for their site conditions. Other methods may be available for monitoring well installation, and qualified professionals should have flexibility to exercise judgement concerning alternatives not covered in this guide. The practice described in this guide is current at the time of issue; however, new, alternative, and innovative methods may become available prior to revisions. Therefore, users should consult with manufacturers or producers prior to specifying program requirements.1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgement. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Installation of Direct Push Ground Water Monitoring Wells

ASTM D4448-85a(1992) 地下水监测井取样的标准指南

Standard Guide for Sampling Ground-Water Monitoring Wells

ASCE 33-01-2001 综合跨界国际水质管理协议

The purpose of Comprehensive Transboundary International Water Quality Management Agreement is to provide a model for comprehensive water quality planning and management of shared water resources. This model agreement is based on the concept of shared sovereignty and is appropriate only for those situations in which the Parties are prepared to relinquish a significant degree of sovereignty over their portion of the shared water resource. The agreement is extensive and considers most aspects of planning and management of water resources. The objective of this comprehensive, integrated agreement is to achieve allocation based on equitable utilization. The intent of this agreement is to be sufficiently flexible for use on an international scale and in a variety of geopolitical settings.

Comprehensive Transboundry International Water Quality Management Agreement

ONORM M 6231-2001 地表不流动水的生态调查和评价准则

Die ?NORM M 6231 enth?lt Richtlinien für die ?kologische Untersuchung und die Bewertung des Zustandes von stehenden Gew?ssern im Sinne der Vorgaben des ?sterreichischen Wasserrechtsgesetzes 1959, des Hydrographiegesetzes sowie der EU-Wasserrahmenrichtlinie (EU-WRRL). Gegenstand dieser ?NORM ist weiters die Erhebung der limnologischen Grundlagen für die Beurteilung der Badeeignung stehender Gew?sser, die mikrobiologischen Untersuchungen zur hygienischen Beurteilung der Badequalit?t sind in ?NORM M 6230 zusammengefasst. Die Behandlung gew?sserspezifischer Fragestellungen des ?kosystemaren Naturschutzansatzes in den einzelnen Lan-des-Naturschutzgesetzen sind ebenfalls Gegenstand dieser ?NORM. Diese ?NORM bezieht sich auf alle Typen stehender Oberfl?chengew?sser, wie natürlich und künstlich entstandene Seen, Weiher, Tümpel sowie Teiche und Speicherseen. Laufstaue, Fischzuchtanlagen sowie Beckenb?der gelten nicht als stehende Gew?sser im Sinne dieser ?NORM. Bei flachen polymiktischen Seen (zB Neusiedlersee) sind insbesondere die physikalisch-chemischen Untersuchungsmethoden erforderlich, in weiterer Folge sind die Bewertungsmethoden entsprechend anzupassen. Die ?NORM ist als Richtlinie für Untersuchungen aufzufassen, deren Ziel es ist, eine Bewertung des Zustandes von stehenden Gew?ssern und ihres Tier- und P

Guidelines for the ecological survey and evaluation of stagnat surface waters

SNI 06-6596-2001 水处理金属分析. 原子吸收光谱仪

Water treatment for metal analysis by atomic absorption spectrophotometers

DS/EN ISO 8689-1:2000 水质 河流生物分类 第1部分：底栖大型无脊椎动物调查生物质量数据解释指南

This part of the standard gives guidance on the interpretation of biological quality data relating to running waters from surveys of benthic macroinvertebrates. It is recognized that for a complete assessment of ecological status, other elements of biological quality should be assessed. NOTE: Annex A gives guidance on how the comparison of the various classification systems can be made where classifications of the biological quality of running waters using benthic macroinvertebrates already exist

Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates

DS/EN ISO 8689-2:2000 水质 河流生物分类 第2部分：底栖大型无脊椎动物调查生物质量数据表示指南

This standard gives guidance on the presentation of biological quality data relating to running waters from surveys of benthic macroinvertebrates. The guidance is applicable to the results of surveys using standard methods of sampling and using the classification procedures given in ISO 8689-1. It is recognized that for a complete assessment of ecological status other elements of biological quality should be assessed. NOTE: An explanation of the comparison of different indicies used in the analysis of surveys of benthic macroinvertebrates is given in ISO 8689-1.

Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates

LST EN ISO 8689-2:2000 水质 河流生物分类 第2部分：底栖大型无脊椎动物调查生物质量数据的表示指南（ISO 8689-2:2000）

Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000)

LST EN ISO 8689-1:2000 水质 河流生物分类 第1部分：底栖大型无脊椎动物调查生物质量数据解释指南（ISO 8689-1:2000）

Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000)

JIS K 0410-3-4:2000 水质.取样.第4部分:天然和人工湖水的取样指南

この規格は，天然及び人造湖からの水試料のサンプリング計画の策定，サンプリング技術並びに取扱いと保存に適用する詳細な原則を示す。 微生物試験用のサンプリングは含まない。

Water quality -- Sampling -- Part 4: Guidance on sampling from lakes, natural and man-made

JIS K 0410-3-9:2000 水质.取样.第9部分:海水取样指南

この規格は，感潮水域の海水(例えば，河口及び感潮入江，沿岸水域及び外洋)試料のサンプリング計画の策定，サンプリング技術及び試料の取扱い，保存に適用する原則に関する指針を示す。微生物及び生物試験用の試料採取は取り扱わない。微生物試験用のサンプリングの一般的指針はISO 8199に示す。

Water quality -- Sampling -- Part 9: Guidance on sampling from marine waters

JIS K 0410-3-6:2000 水质.取样.第6部分:河水和溪流水的取样指南

—この規格は，物理的，化学的，微生物学的評価のための河川からのサンプリング計画の策定，サンプリング技術及び水試料の取扱いに適用する原則を示す。これは河口，沿岸のサンプリングには適用せず，運河その他流況が限定された内陸氷のサンプリングへの適用には制限がある。—沈降物及び生物の試験には特殊な操作が必要であり，この規格の主題ではない。天然又は人工のダムが数日間以上，水の滞留を招く場合は，サンプリング目的には河川の一帯を静止水塊とみなすとよい。 JIS K 0410-3-4(ISO 5667-4)はこの場合のサンプりングの指針を示す。ーサンプリング目的の確定は，特定のサンプリング間題に適用すべき原則を確認するための重要な先行条件である。

Water quality -- Sampling -- Part 6: Guidance on sampling of rivers and streams

BS EN ISO 8689-2:2000 水质.江河的生物分类.对底栖大型无脊椎动物调查的生物质量数据的表示导则

This part of ISO 8689 gives guidance on the presentation of biological quality data relating to running waters from surveys of benthic macroinvertebrates. The guidance is applicable to the results of surveys using standard methods of sampling and using the classification procedures given in ISO 8689-1. It is recognized that for a complete assessment of ecological status other elements of biological quality should be assessed. NOTE An explanation of the comparison of different indices used in the analysis of surveys of benthic macroinvertebrates is given in ISO 8689-1.

Water quality. Biological classification of rivers. Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates

BS EN ISO 8689-1:2000 水质 河流的生物分类 大型底栖无脊椎动物调查生物质量数据解释指南

This part of ISO 8689 gives guidance on the interpretation of biological quality data relating to running waters from surveys of benthic macroinvertebrates. It is recognized that for a complete assessment of ecological status, other elements of biological quality should be assessed. NOTE Annex A gives guidance on how the comparison of the various classification systems can be made where classifications of the biological quality of running waters using benthic macroinvertebrates already exist.

Water quality. Biological classification of rivers. Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates