35.160 微处理机系统 标准查询与下载

ANSI/VITA 48.0-2010 使用坚固耐用设计执行（REDI）的微型计算机的机械规范

Each of the lower level standards focuses on a specific cooling method and will define the mechanical requirements that are needed to ensure mechanical interchangeability in the sub-rack. This standard utilizes a common circuit board for all the cooling methods and incorporates the features required to achieve 2 Level Maintenance compatibility.

Mechanical Specification for Microcomputers Using Ruggedized Enhanced Design Implementation (REDI)

ANSI/VITA 48.2-2010 应用在VITA VPX的REDI传导冷却的微型计算机的机械规范

To define the mechanical requirements that are needed to ensure the mechanical interchangeability of conduction cooled 3U and 6U plug-in units and defines the features required to achieve 2 Level Maintenance compatibility.

Mechanical Specification for Microcomputers Using REDI Conduction Cooling Applied to VITA VPX

ANSI/VITA 48.5-2010 经冷却空气流的电子插接元件的机械标准

This standard establishes the design requirements for an air-flow-through cooled plug-in unit with a 6U form factor

Mechanical Standard for Electronic Plug-in units Using Air Flow Through Cooling

ANSI/IEEE 1680:2009 电子产品的环境评定标准

The 1680 family of standards defines environmental performance criteria for electronic products. The scope of this document is to provide guidelines and implementation procedures for the standards included in the 1680 family of standards.

Standard for Environmental Assessment of Electronic Products

ANSI/NECA 408-2009 总线的安装和维护用标准

This standard describes the installation and maintenance procedures for feeder and plug-in busways and accessories rated 600 Volts AC or less, and 100 Amperes or more. It also covers periodic routine maintenance procedures for busway, and special procedures used after adverse operating conditions such as a short-circuit, ground-fault, or immersion in water. This publication does not cover lighting busway, trolley busway, cable-bus, or medium-voltage or metal-enclosed busway.

Standard for Installing and Maintaining Busways

ANSI/NFPA 75-2009 信息技术设备的保护标准

This standard covers the requirements for the protection of information technology equipment and information technology equipment areas.

Standard for the Protection of Information Technology Equipment

HS/T 19-2006 海关计算机系统软硬件选型规范

Regulations on selecting types of software and hardware for computer system at Custom

VDI/VDE 2184-2008 现场总线系统的可靠运行和维护

The guideline provides descriptions for reliable operation and maintenance of field bus systems.

Reliable operation and maintenance of field bus systems

SJ 20794-1-2007 RNK5084型有可靠性指标的表面安装膜固定电阻网络详细规范

本规范规定了RNK5084 型有可靠性指标的表面安装膜固定电阻网络(以下简称电阻网络)的详细要求。 电阻网络适用于C、H、K、M、V和R特性。

Resistor network, fixed, film, surface mount, established reliability, style RNK5084 detail specificatiion for

SJ 20794-2-2007 RNK5085型有可靠性指标的表面安装膜固定电阻网络详细规范

本规范规定了RNK5085 型有可靠性指标的表面安装膜固定电阻网络（以下简称电阻网络）的详细要求。 电阻网络适用于C、H、K、M、V和R的特性。

Resistor network, fixed, film, surface mount, established reliability, style RNK5085 detail specificatiion for

ANSI/ASTM F2218:2008 计算机处理系统用硬件执行指南

Guide for Hardware Implementation for Computerized Systems

ANSI/VITA 57.1-2008 FPGA Mezzanine卡(FMC)标准

The purpose of this standard is to create an I/O mezzanine module, which works intimately with an FPGA processing device.

FPGA Mezzanine Card (FMC) Standard

ANSI/IEEE 1014:2008 通用底板总线用标准:VME总线

This standard specifies a high-performance backplane bus for use in microcomputer systems that employ single or multiple microprocessors. It is based on the VMEbus specification, released by the VME Manufacturers' Group in August of 1982. The bus includes four subbuses: data transfer bus, priority interrupt bus, arbitration bus, and utility bus. The data transfer bus supports 8-, 16-, and 32-bit transfers over a non-multiplexed 32-bit data and address highway.

Standard for a Versatile Backplane Bus: VMEbus

ANSI/IEEE 1101.1:2008 使用IEC 60603-2连接器的微型计算机用机芯规范的标准

The basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09) and ANSI/EIA 310-D-1992, together with the basic dimensions of a compatible range of plug-in units, printed boards, and backplanes, are covered. The dimensions and tolerances necessary to ensure mechanical function compatibility are provided. This standard offers total system integration guidelines (advantages: shorter design and development time, etc.).

Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 Connectors

KS X 5001-2007(2018) 个人计算机（1）

Personal computer(1)

KS X 5001-2007(2023) 个人电脑（1）

Personal computer(1)

KS X 5001-2007 个人计算机(1)

이 규격은 개인용 컴퓨터(1)(이하 개인용 컴퓨터라 한다)의 구성 및 이와 관련된 주요 기

Personal computer(1)

DS/EN 61606-4:2007 视听设备 数字音频部件 音频特性的基本测量方法 第4部分：个人计算机

This part of 61606 specifies the basic measurement methods of a linear PCM signal for an audio part of personal computers (PCs) and applies to both desktop and portable computers. The common measuring conditions and methods are described in 61606-1.Specific conditions and methods of measurement for PCs are given in this standard.NOTE 1: The methods described are mostly based on sampling frequencies from 8 kHz to 192 kHz and bit length from 8 bit to 24 bit.NOTE 2: This standard describes tests for equipment which has digital input with analogue output and analogue input with digital output. Digital input data are provided from an internal HDD or other memory

Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 4: Personal computer

HJB 389.5-2007 水面舰艇训练模拟器技术要求 第5部分：通信系统

Technical requirements for surface warship training simulators Part 5: Communication systems

HJB 389.4-2007 水面舰艇训练模拟器技术要求 第4部分：声纳系统

Surface warship training simulator technical requirements part 4: sonar system