35.160 微处理机系统 标准查询与下载

IEC PAS 62453-3:2006 现场设备工具界面规范.第3部分:PROFIBUS通讯

This part of IEC 62435 provides information for integrating the PROFIBUS protocol into the FDT interface specification (IEC 62453-1). This PAS neither contains the FDT specification nor modifies it.

Field device tool (FDT) interface specification - Part 3: PROFIBUS communication

IEC PAS 62453-4:2006 现场设备工具界面规范.第4部分:HART通讯

This part of IEC 62435 provides information for integrating the HART1 protocol into the FDT interface specification (IEC 62453-1). This PAS neither contains the FDT specification nor modifies it.

Field device tool (FDT) interface specification - Part 4: HART communication

IEEE 1680-2006 包括膝上个人电脑、桌上个人电脑和个人电脑检测器的个人电脑产品的环境评定

Standard for Environmental Assessment of Personal Computer Products (including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Monitors) / Note: Approved 2006-12-05.

Environmental assessment of personal computer products, including laptop personal computers, desktop personal computers, and personal computer monitors

ANSI/ASME V&V10-2006 V&V10.计算机固体力学中的验证与确认指南

The purpose of this document is to provide the computational solid and structural mechanics community with a common language, a conceptual framework, and general guidance for implementing the processes of computational model V&V. To this end, the reader will find a glossary of terms, figures illustrating the recommended overall approach to V&V activities, and discussions of factors that should be considered in developing and executing a V&V program. To maximize the value to the engineering community, the PTC 60 committee chose to write from the perspective of V&V for high-consequence computational predictions of complex engineering systems. However, the guidance provided here is also appropriate for simpler applications, recognizing that smaller budgets and lower risks will reduce the scope of the V&V effort. Also, while the concepts and terminology presented here are applicable to all applied mechanics, the focus is on computational solid mechanics.

V&V 10 - Guide for Verification and Validation in Computational Solid Mechanics

KS X ISO/IEC 15776-2005(2020) VME64总线规范

VME64bus－Specification

KS X ISO/IEC 15205:2005 SBus.基片和模块互连总线

SBus? ?? ??? SBus ??? ??? ??? ?? ??? ???? ?? ??? ?

SBus-Chip and module interconnect bus

KS X ISO/IEC 15205-2005(2020) SBus－芯片和模块互连总线

SBus－Chip and module interconnect bus

KS X ISO/IEC 15776:2005 VME64总线.规范

VME?? ??? ??????? ??? ??? ????????, ??? ?? ??, ???

VME64bus-Specification

ISO/TR 18492:2005 电子文献信息的长期保存

This Technical Report provides practical methodological guidance for the long-term preservation and retrieval of authentic electronic document-based information, when the retention period exceeds the expected life of the technology (hardware and software) used to create and maintain the information. It takes into account the role of technology neutral information technology standards in supporting long-term access. This guidance also acknowledges that ensuring the long-term preservation and retrieval of authentic electronic document-based information should involve IT specialists, document managers, records managers and archivists. It does not cover processes for the creation, capture and classification of authentic electronic document-based information. This Technical Report applies to all forms of information generated by information systems and saved as evidence of business transactions and activities. NOTE Electronic document-based information constitutes the "business memory" of daily business actions or events and enables entities to later review, analyse or document these actions and events. As such, this electronic document-based information is evidence of business transactions that enable entities to support current and future management decisions, satisfy customers, achieve regulatory compliance and protect against adverse litigation. To achieve this goal, this electronic document-based information should be retained and appropriately preserved.

Long-term preservation of electronic document-based information

DS/IEC/TS 62393:2005 便携式和手持式多媒体设备 移动计算机 电池运行时间测量

This Technical Specification defines the operation-mode mix of portable and hand-held multimedia equipment which can be driven by battery, especially mobile personal computers, in order to clarify the issues to be stadardized on the battery run time.

Portable and hand-held multimedia equipment - Mobile computers - Battery run-time measurement

SJ/T 11311-2005 信息设备资源共享协同服务 第4部分:测试验证规范

Information device intelligent grouping and resource sharing Part 4: Specifications for testing and verification

SJ/T 11310-2005 信息设备资源共享协同服务 第1部分:基础协议

Information device intelligent grouping and resource sharing Part 1: Fundamental protocol

ISO/TR 15801:2004 电子成像.信息电子存储.可信和可靠性推荐方法

This Technical Report describes the implementation and operation of information management systems which store information electronically and where the issues of trustworthiness, reliability, authenticity and integrity are important. The whole life cycle of a stored electronic document is covered, from initial capture to eventual destruction. This Technical Report is for use with any information management system, including traditional document imaging, workflow and COLD/ERM technologies, and using any type of electronic storage medium including WORM and rewritable technologies. Image files may potentially contain any type of data: for example, correspondence, forms, drawings. This Technical Report covers all such image files, whether created and/or imported directly or through a network, from the time at which the system assumes control of the image file. This Technical Report does not cover processes used to evaluate the authenticity of information prior to it being stored or imported into the system. However, it can be used to demonstrate that output from the system is a true reproduction of the original document. Where in this document the term system is used, it should be taken as meaning the information management system that is being reviewed, unless otherwise stated.

Electronic imaging - Information stored electronically - Recommendations for trustworthiness and reliability

ANSI/INCITS 375-2004 信息技术.串行总线协议(SBP-3)

This standard defines a protocol for the transport of commands and data over High Performance Serial Bus, as specified by IEEE Std 1394-1995 [B8] as amended by IEEE Std 1394a-2000 [B9] and IEEE Std 1394b-2002 [B10] (collectively IEEE 1394). The transport protocol, Serial Bus Protocol 3 (SBP-3), requires implementations to conform to the aforementioned standards as well as to IEEE Std 1212-2001, Control and Status Register (CSR) Architecture for microcomputer buses [B6], and permits the exchange of commands, data and status between initiators and targets connected to Serial Bus.

Information Technology Serial Bus Protocol (SBP-3)

CAN/CGSB-201.1-2003 微机设备的最低产品和保修服务要求

1. SCOPE 1.1 This standard defines minimum product and warranty service requirements for the procurement of microcomputerbased equipment. 1.2 This standard excludes any items not defined as equipment in Section 3. 1.3 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.

Minimum Product and Warranty Service Requirements for Microcomputer-based Equipment

ANSI/VITA 39-2003 PMC和PMC处理机用PCI-X辅助标准

This proposed standard provides details for implementing PCI-X on PMCs and Processor PMCs modules.

PCI-X Auxiliary Standard for PMCs and Processor PMCs

CAN/CSA-ISO/IEC 15205:2002(R2011) SBus 芯片和模块互连总线

This National Standard of Canada is equivalent to International Standard ISO/IEC 15205:2000 / IEEE Std 1496, 1993 (first edition, 2000-06). 1.1 Scope and object SBus is a high performance computer I/O interface for connecting integrated circuits and SBus Cards to a computer system motherboard. This standard defines the mechanical, electrical, environmental, and protocol requirements for the design of SBus Cards and the computer system motherboard that supports those cards. Every SBus Card shall implement appropriate self-descriptive and initialization firmware using FCode, which is similar to the Forth programming language. The details of this firmware standard are beyond the scope of this standard.1) In addition, other software interfaces may be used for communication with SBus Cards. SBus is intended to provide a high performance I/O bus interface with a small mechanical form factor. The small size, high levels of integration, and low power usage of SBus Cards enable them to be used in laptop computers, compact desktop computers, and other applications requiring similar characteristics. SBus Cards are mounted in a plane parallel to the motherboard of the computer system, allowing the computer system to have a low profile. SBus is not designed as a general purpose backplane bus. SBus allows transfers to be in units of 8, 16, 32, or 64 bits. Burst transfers are allowed to further improve performance. SBus allows a number of SBus Master devices to arbitrate for access to the bus. The chosen SBus Master provides a 32-bit virtual address which the SBus Controller maps to the selection of the proper SBus Slave and the development of the 28-bit physical address for that Slave. The selected SBus Slave then performs the data transfers requested by the SBus Master. Simple SBus Cards may be designed to operate solely as Slaves on the SBus.

SBus - Chip and module interconnect bus

LST HD 592 S1-2002 微处理器系统的二进制浮点运算（IEC 60559:1989）

Binary floating-point arithmetic for microprocessor systems (IEC 60559:1989)

LST HD 593.2 S1-2002 微处理器系统总线 8 位和 16 位数据（MULTIBUS I）第2部分：系统总线配置的机械和引脚说明，带边缘连接器（直接）（IEC 60796-2:1990）

Microprocessor system bus 8-bit and 16-bit data (MULTIBUS I). Part 2: mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) (IEC 60796-2:1990)

LST HD 593.1 S1-2002 微处理器系统总线 8 位和 16 位数据（MULTIBUS I）第1部分：具有电气和时序规范的功能描述（IEC 60796-1:1990）

Microprocessor system bus 8-bit and 16-bit data (MULTIBUS I). Part 1: Functional description with electrical and timing specifications (IEC 60796-1:1990)