43.120 电车 标准查询与下载

GSO ISO 21782-4:2024 电力驱动道路车辆 电力推进部件试验规范 第4部分：DC/DC 转换器的性能试验

This document specifies performance tests and each evaluation for the DC/DC converter in the voltage class B electric propulsion system of electrically propelled road vehicles.

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 4: Performance testing of the DC/DC converter

GSO IEC 60335-2-114:2024 家用和类似电器 安全 第2-114部分：个人电动交通工具的特殊要求

IEC 60335-2-114:2022 deals with the electrical safety of Personal e-Transporters used in the private or public areas. The device can have one or more wheels, self-balancing provisions, provisions for the transport of cargo and can be for private, commercial, shared use or for hire. Examples of devices that are within the scope of this standard are – self-balancing transport devices with or without a seat (also known as hover boards); – electric scooters without a seat including scooters with detachable seats; – electric mono-wheels with or without a seat; – electric skateboards. This standard does not apply to – appliances intended exclusively for industrial purposes; – appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); – electric mopeds with a seat; – electric bicycles; – electric motorcycles; – devices exclusively intended for use by people with a physical disability such as electrically powered wheel chairs; – devices with hybrid power mode such as Personal e-Transporters incorporating a small internal combustion motor where the internal combustion motor is the primary power source; – ride-on or walk-behind commercial floor treatment machines (IEC 60335-2-72). An electric scooter with a seat is classified as an electric moped and an electric moped without a seat is classified as an electric scooter. As far as is practicable, this standard deals with the common electrical safety hazards presented by Personal e-Transporters that are encountered by all users. However, in general, it does not take into account – persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; – children playing with the appliance; – safety of riding/driving the device including aspects such as maximum attainable speed, stability, acceleration, braking, visibility, ergonomics, and reliability of driving controls such as acceleration or braking controls. Attention is drawn to the fact that – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary; – in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national transport authorities and similar authorities. This second edition cancels and replaces the first edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with IEC 60335-1:2020; b) change of title of the standard to reflect the expanded scope; c) expansion of the scope to include a variety of Personal e-Transporters; d) introduction of UV testing for markings on Personal e-Transporters for shared use in a public space (7.14); e) introduction of test probe 19 (8.1.1, 20.2, B.22.3, B.22.4). This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.

Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for Personal-e-Transporters

GSO EN 17128:2024 用于运输人员和货物及相关设施且无需获得道路使用型式批准的轻型机动车辆 个人轻型电动车辆（PLEV） 要求和测试方法

This document applies to personal light electric vehicles totally or partially electrically powered from self-contained power sources with or without self-balancing system, with exception of vehicles intended for hire from unattended station. This document applies to personal light electric vehicles with or without self-balancing system totally or partially electrically powered from self-contained power sources having battery voltages up to 100 VDC, with or without an integrated battery charger with up to a 240 VAC input. This document specifies safety requirements, test methods, marking and information relating to personal light electric vehicles to reduce the risk of injuries to both third parties and the user during intended use, i.e. when used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer. This document does not apply to: - vehicles that are considered as toys; - vehicles without self-balancing system with a seat; - vehicles intended for competition; - electrically powered assisted cycles (EPAC); - vehicles and/or devices intend for use for medical care; - electric vehicles having a maximum design speed above 25 Km/h; - vehicles having a rated voltage of more than 100 VDC or 240 VAC; - vehicles without an on-board driving operator. NOTE 1 EN ISO 13482 gives the requirements for vehicles without on-board driving operator. NOTE 2 See D.2. NOTE 3 The local regulation could limit the use of the vehicle to a speed lower than 25 km/h.

Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Requirements and test methods

T/QGCML 3083-2024 新能源电动驱箱盖

本文件规定了新能源电动驱箱盖的术语定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。  本文件适用于新能源汽车电动驱动系统的箱盖。

New energy electric drive box cover

GSO ISO 21782-5:2024 电力驱动道路车辆 电力推进部件试验规范 第5部分：电机系统的工作负载试验

This document specifies operating load tests and test criteria for the motor system designed as a voltage class B electric propulsion system for electrically propelled road vehicles.

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 5: Operating load testing of the motor system

GSO IEC 61851-24:2024 电动汽车传导充电系统 第24部分：直流电动汽车充电站和电动汽车之间用于控制直流充电的数字通信

IEC 61851-24:2014, together with IEC 61851-23, applies to digital communication between a d.c. EV charging station and an electric road vehicle (EV) for control of d.c. charging, with an a.c. or d.c. input voltage up to 1 000 V a.c. and up to 1 500 V d.c. for the conductive charging procedure. The EV charging mode is mode 4, according to IEC 61851-23. Annexes A, B, and C give descriptions of digital communications for control of d.c. charging specific to d.c. EV charging systems A, B and C as defined in Part 23. The contents of the corrigendum of June 2015 have been included in this copy.

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

GSO IEC 61851-21-1:2024 电动汽车传导充电系统 第21-1部分 电动汽车车载充电器对交流/直流电源传导连接的 EMC 要求

IEC 61851-21-1:2017, together with IEC 61851-1:2010, gives requirements for conductive connection of an electric vehicle (EV) to an AC or DC supply. It applies only to on-board charging units either tested on the complete vehicle or tested on the charging system component level (ESA - electronic sub assembly). This document covers the electromagnetic compatibility (EMC) requirements for electrically propelled vehicles in any charging mode while connected to the mains supply. This first edition, together with IEC 61851-21-2, cancels and replaces IEC 61851-21:2001. It constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61851‑21:2001: a) this document addresses now only EMC tests instead of other electrical tests; b) test setups are defined more precisely; c) Annex A "Artificial networks, asymmetric artificial networks and integration of charging stations into the test setup" was added.

Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply

ISO/TS 5474-5:2024 电力驱动的道路车辆 车辆与外部电路之间电力传输的功能和安全要求 第 5 部分：自动传导功率传输

1   Scope This document defines requirements for the onboard system (vehicle side) related to the automatic connection for conductive alternating current (AC) and/or direct current (DC) power transfer between electrically propelled road vehicles (EVs) and external electric circuits. This document addresses the following aspects: — electrical and mechanical safety requirements; — compatibility requirements; — environmental conditions; — functionality requirements; — test procedures. This document applies to: — EVs supporting automatic connection of a vehicle inlet according to IEC 62196-2, IEC 62196-3, IEC TS 62196-3-1 or IEC TS 63379 1 (category 1) and — EVs supporting automatic connection of a category 3 vehicle inlet or category 3 plug (typically at the underbody of the vehicle) according to IEC TS 61851-26. NOTE 1 ...

Electrically propelled road vehicles. Functional and safety requirements for power transfer between vehicle and external electric circuit. - Part 5: Automatic conductive power transfer

GSO ISO 21782-7:2024 电力驱动道路车辆 电力推进部件试验规范 第7部分：DC/DC 转换器的工作负载试验

This document specifies the operating load test and test criteria for the DC/DC converter designed as a voltage class B electric propulsion system of electrically propelled road vehicles.

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 7: Operating load testing of the DC/DC converter

24/30451363 DC BS ISO 21498-2 电动道路车辆 B 级电压系统和组件的电气规范和测试 第2部分：组件的电气测试

BS ISO 21498-2 Electrically propelled road vehicles — Electrical specifications and tests for voltage class B systems and components - Part 2: Electrical tests for components

T/DCB 002-2023 废旧动力电池报废量的测算方法

本文件规定了废旧动力电池报废量测算的总体要求和测算方法。 本文件适用于废旧动力电池报废量的测算。

Calculation method of scrap amount of used power batteries

T/GERS 0034-2023 锂离子动力蓄电池快充循环性能测试规程

本文件规定了电动汽车用锂离子动力蓄电池快充循环性能试验条件和试验方法等。

Test procedure for fast charging cycle performance of lithium-ion traction battery

T/BJQC 202302-2023 燃料电池电动客车维护技术规范

本文件规定了燃料电池电动客车安全要求、维护要求。本文件适用于由专业维护人员对搭载质子交换膜燃料电池、气态氢气的燃料电池电动客车的维护。

Specification for maintenance of fuel cell electric bus

T/CES 250-2023 电动汽车可调节负荷调控潜力评估技术导则

本标准规定了电动汽车可调节负荷调控潜力评估技术的相关要求，包括总体要求、数据采集、可行域评估、关键参数预测和调控潜力聚合等方面技术要求。 （1）术语及定义 主要包括充电站、电动汽车可调节负荷、可调控时间、电动汽车可行域和电动汽车负荷聚合商等的定义。 （2）总体要求 对电动汽车调控潜力来源，评估结果应用场景、参与调控潜力评估主体以及调控潜力评估流程进行了规范。 （3）数据采集 对数据采集基本要求、数据校验、数据存储以及数据内容进行了规范。 （4）可行域评估 对可行域评估所需数据、得到结果形式和评估需要考虑的因素进行了规范。 （5）关键参数预测 对预测的参数、预测方法以及预测结果的评价进行了规范。 （6）调控潜力聚合 对调控潜力加和、调控潜力评估结果形式以及其应满足的应用场景进行了规范。

Guidelines for assessment of electric vehicles load regulation potentiality

T/CSAE 314-2023 多工况下燃料电池汽车动力系统效率 台架试验方法

本文件规定了燃料电池汽车动力系统效率测试在不同工况条件下的台架试验方法。 本文件适用于使用气态氢的燃料电池电动汽车动力系统。

Efficiency of fuel cell vehicle power system under multiple operating conditions— Bench test method

T/QGCML 2380-2023 飞行电动车

本文件规定了飞行电动车的术语和定义、组成及结构、技术要求、试验方法、检验规则、标志、包装、运输及贮存等。 本文件适用于飞行电动车的研发、生产和使用的全过程管理。

flying electric car

T/CECA-G 0247-2023 纯电动汽车动力系统能效限定值及能效 等级

本文件规定了纯电动汽车动力系统能效等级、技术要求、试验及计算方法。

Minimum allowable values of powertrain efficiency and powertrain efficiency grades of electric vehicles

T/CECA-G 0246-2023 纯电动汽车能效限定值及能效等级

规定了纯电动汽车的能效等级、能效限定值和试验方法

Minimum allowable values of energy efficiency and energy efficiency grades for battery electric vehicles

KS R 1182-2023 道路车辆电动车辆用牵引电动机和逆变器功率试验方法

Road vehicles — Power test method of traction motor and inverter for electrically propelled vehicles

KS R 1133-2023 电动汽车行驶试验方法通则

Electric vehicles — General rules of running test method