55.040 包装材料和辅助物 标准查询与下载

GB/T 16719-1996 双向拉伸聚苯乙烯(BOPS)片材

本标准规定了双向拉伸聚苯乙烯（BOPS）片材（以下简称片材）的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以聚苯乙烯树脂为主要原料，用平膜法挤出经双向拉伸制成的片材。

Biaxially oriented polystyrene (BOPS) sheet

GB/T 16265-1996 包装材料试验方法 相容性

本标准规定了在一个具有可控环境内，包装材料与各种材料互相接触彼此接近地保持一定时间，是否会此起相互的或单方面的变质，从而测定这些材料的相容性。 本标准适用于下列材料的相容性检查： a.中性包装材料与被包装的金属、塑料或其他固体材料； b.气相防锈包装材料与被包装的金属材料； C.气相防锈包装材料与可热封的包装材料； d.液碥、半液碥可剥性塑料、涂料与被保护的金属或其他固体材料。

Test of packaging materials--Compatability

GB/T 16266-1996 包装材料试验方法 接触腐蚀

本标准规定了包装材料对其紧密接触的金属表面腐蚀性的试验方法。 本标准适用于检查经过或未经规定环境处理的包装材料。

Test of packaging materials--Contact corrosivity

GB/T 16267-1996 包装材料试验方法 气相缓蚀能力

本标准规定了载有气相防锈剂的包装材料在正常环境下或在引起加速消耗后，测定对金属的缓蚀能力。 本标准适用于测定气相防锈纸、气相防锈薄膜及载有气相防锈剂的单层、多层复合包装材料。

Test of packaging materials--Vapors corrosion inhibiting ability

GB/T 15718-1995 现场发泡包装材料

本标准规定了现场发泡包装材料的分类、技术要求、试验方法、检验规则及包装。 本标准适用于以两种液体现场发泡（FIP）系统形式提供的聚氨酯泡沫。

Foam-in-place packaging materials

GB/T 14745-1993 包装 缓冲材料 蠕变特性试验方法

本标准规定了包装用缓冲材料蠕变特性试验方法。 本标准适用于板状的包装缓冲材料。

Packaging. Cushioning materials. Test method for creep properties

GB/T 12339-1990 防护用内包装材料

本标准规定了防护包装用内包装材料的分类、技术要求、试验方法、检验规则等。 本标准适用于机械、电子、电器、仪器、仪表、五金工具等产品按GB4768《防霉包装技术要求》、GB4879《防锈包装》、GB5048《防潮包装》选择的内包装材料。

Inner packaging materials in preservation

GB 12255-1990 药品包装用铝箔

本标准规定了药品铝塑泡罩包装（PTP）用涂有保护层和粘合层的硬质纯铝箔的品种、规格、技术要求、试验方法、检验规则、标志、包装、运输、储存要求。 本标准适用于固体药品（片剂、胶囊剂等）铝塑泡罩包装（PTP）用的铝箔。

Aluminum foils packaging for medicine

GB/T 10456-1989 电化铝烫印箔

本标准规定了电化铝烫印箔产品主要技术指标、试验方法和检验规则。 本标准适用于以聚酯薄膜为基材，经着色、真空镀铝、涂粘着剂而制成的主要用于纸张制品的烫印箔。

Hot stamping foil

GB/T 8169-1987 包装用缓冲材料振动传递特性试验方法

本标准规定了包装用缓冲材料的振动传递特性试验方法。本试验用于评定在正弦振动作用下包装用缓冲材料的振动传递（隔振）特性及对包装内装物的保护能力。本试验获得的数据可用于包装的隔振设计。 本标准适用于非线性弹性的缓冲材料。

Testing method of vibration transmissibility for package cushioning materials

GB/T 8171-1987 使用缓冲包装材料进行的产品机械冲击脆值试验方法

本标准规定了在机械冲击作用下测定产品脆值的试验方法，试验时使用缓冲材料控制传递到产品上的冲击力。本试验获得的脆值可用于产品的缓冲包装设计及产品的修正设计。

Test method for mechanical shock fragility rating of products--Using package cushioning materials

GB/T 8168-1987 包装用缓冲材料静态压缩试验方法

本标准规定了包装用缓冲材料的静态压缩试验方法。本试验用于评定在静载荷作用下缓冲材料的缓冲性能及其在流通过程中对内装产品的保护能力。本试验获得的数据可用于缓冲包装设计。 本标准适用的包装用缓冲材料的形状可以是块状、片状、丝状、粒状以及成型件等形式，不适用于金属弹簧及防震橡胶。

Testing method of static compression for package cushioning materials

GB/T 8167-1987 包装用缓冲材料动态压缩试验方法

本标准规定了包装用缓冲材料的动态压缩试验方法。本试验用于评定缓冲材料在冲击作用下的缓冲性能及其在流通过程中对内装产品的保护能力。本试验获得的数据可用于缓冲包装设计。 本标准适用的包装用缓冲材料的形状可以是块状、片状、丝状、粒状以及成型件等形式。不适用于金属弹簧及防震橡胶。

Testing method of dynamic compression for package cushioning materials

GB 5188-1985 黄铜箔

Brass foil

GB 3877-1983 钼箔

Molybdenum foil

T/QGCML 4307-2024 抗静电双层气泡袋

本文件规定了抗静电双层气泡袋的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于抗静电双层气泡袋的生产和检验。

Antistatic double layer bubble bag

T/EJCCCSE 029-2024 水转印小膜纸及水转印花纸技术规范

5.1　印刷质量 5.2　外观质量 5.3   吸水纸质量 5.4　彩烤质量

Technical Specifications for Water Transfer Printing Small Film Paper and Water Transfer Printing Paper

T/QGCML 4196-2024 化妆品用金属瓶盖

本文件规定了化妆品用金属瓶盖的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于化妆品用金属瓶盖。

Metal bottle caps for cosmetics

ASTM D2063/D2063M-24 使用非自动（手动）扭矩测试设备测量连续螺纹封闭包装扭矩保持力的标准试验方法

Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

ASTM D3981-09a(2024)e1 一般用途和包装应用中密度聚乙烯制成的聚乙烯薄膜的标准规范

1.1  This specification covers unpigmented, unsupported, sheet or tubular, medium-density polyethylene films (hereafter referred to as film or films) from resins having densities in the range from 926.0 to 938.0 kg/m3 (0.926 to 0.938 g/cm3), inclusive, as measured on molded plaques. 1.2  This specification is applicable to homopolymer polyethylene but is not restricted to it. 1.3  This specification is also applicable to films made from copolymer polyethylene commonly referred to in industry as low-pressure polyethylene. 1.4  This specification is also applicable to films made from blends of homopolymers and copolymers, including ethylene/vinyl-acetate copolymers. 1.5  This specification allows for the use of recycled polyethylene film or resin as feedstock, in whole or in part, as long as all the requirements of this specification are met and as long as any specific requirements as governed by the producer and end user are also met (see Note 1 ). Note 1:  Guide D7209 contains terminology and definitions relating to recycled plastics. 1.6  Special care must be exercised if this specification is applied to colored or pigmented films. This specification does not address specific problems associated with coloring, such as, quantity and quality of pigment dispersion, optical properties, and increase in density. These and other areas must be taken into account by mutual agreement between the supplier and the purchaser. 1.7  The thickness of the films covered by this specification range from 25 to 100 μm (0.001 to 0.004 in.), inclusive. The maximum width of the sheet or lay-flat is 3.05 m (120 in.). 1.8  This specification does not cover oriented heat-shrinkable films. 1.9  This specification defines the levels of various physical properties from which specifications for specific films are to be described. The levels of physical properties required by a film for a given application are selected from Section 6 and the corresponding tables. However, Sections 7.2 – 7.5 relating to tolerances shall apply without change to all film falling within the scope indicated by the title and 1.1 – 1.4 . 1.10  This specification covers dimensional tolerances, classification, intrinsic quality requirements, and test methods. The dimensional tolerances include thickness, width, and length or yield. Classification defines types, classes, surfaces, and finishes. The intrinsic quality requirements include density, workmanship, impact strength, tensile strength, heat sealability, and odor, as well as the classification properties for stiffness, coefficient of friction, optical properties, and surface treatment. A sampling method is included. 1.11  The values stated in SI units are to be regarded as standard. The values in parentheses are given for information only. 1.12  The following precautionary caveat pertains only to the test methods portion, Section 10 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 2:  There is no known ISO equivalent to this standard. 1.13  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications