55.040 包装材料和辅助物 标准查询与下载

ASTM D999-08(2023) 船运集装箱振动试验的标准试验方法

Standard Test Methods for Vibration Testing of Shipping Containers

T/SHBX 013-2023 《全生物降解日用塑料袋》

本文件规定了全生物降解日用塑料袋的分类，要求，试验方法，检验规则，包装、包装标志、运输和贮存。

Biodegradable daily plastic bags

T/CASME 898-2023 EPE珍珠棉材料

本文件规定了EPE珍珠棉材料的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

EPE pearl cotton material

T/CASME 896-2023 塑料气垫膜卷膜

本文件规定了塑料气垫卷膜的产品分类、技术要求、试验方法、检验规则，以及标志、包装、运输和贮存。

Plastic air cushion roll film

ASTM F1929-23 用染料渗透法检测多孔医疗包装中密封泄漏的标准试验方法

Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

DB43/T 2840-2023 食品相关产品例行监督检查技术规范

Technical Specifications for Routine Supervision and Inspection of Food Related Products

DB43/T 2839-2023 食品接触用非防盗塑料瓶盖通用技术要求

General technical requirements for non-anti-theft plastic bottle caps for food contact

ASTM D5814-23 用平板试验测定回收聚对苯二甲酸乙二醇酯（PET）薄片和切片中污染的标准实施规程

Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

T/QGCML 1771-2023 防泄漏自立液体袋

 本文件规定了防泄漏自立液体袋的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于防泄漏自立液体袋的生产及检验。

Leak-proof self-standing liquid bag

T/YNIA 021-2023 MOFs材料比表面积和孔容积测定—静态容量法

本文件规定了BET静态容量法测定金属有机框架化合物（Metal Organic Framework, MOFs）材料比表面积和孔容积的方法

Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method

ASTM D1596-14(2023) 包装材料动态冲击缓冲特性的标准试验方法

Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

ASTM D7932-17(2023) 极端分布环境中使用的印刷压敏胶粘标签的标准规范

Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments

ASTM D4577-19(2023) 恒定载荷下容器抗压性的标准试验方法

Standard Test Method for Compression Resistance of a Container Under Constant Load

ASTM D3332-99(2023) 用冲击机测定产品机械冲击脆性的标准试验方法

Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

ASTM F392/F392M-23 柔性耐久性调节柔性屏障材料的标准实施规程

Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability

T/CPF 0070-2023 质量分级及“领跑者”评价要求 包装用双向热收缩型聚酯薄膜

本文件规定了包装用双向热收缩型聚酯薄膜产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分和产品质量分级。

Assessment requirements for quality grading and forerunner— Biaxial orientated heat-shrinkable polyester film for packaging

T/CPF 0068-2023 质量分级及“领跑者”评价要求 冷烫印光学防伪箔

本文件规定了冷烫印光学防伪箔产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分和产品质量分级。

Assessment requirements for quality grading and forerunner— Optical anti-counterfeiting cold stamping foil

T/CPF 0071-2023 质量分级及“领跑者”评价要求 食品包装容器用聚乙烯发泡垫片

本文件规定了食品包装容器用聚乙烯发泡垫片产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分和产品质量分级。

Assessment requirements for quality grading and forerunner— Polyethylene foam liner for food packaging containers

DB23/T 3586-2023 电商快件绿色包装通用要求

General requirements for green packaging for e-commerce express shipments

ASTM F88/F88M-23 柔性屏障材料密封强度的标准测试方法

1.1  This test method covers the measurement of the strength of seals in flexible barrier materials. 1.2  The test may be conducted on seals between a flexible material and another flexible material, a rigid material, or a semi-rigid material. 1.3  Seals tested in accordance with this test method may be from any source, laboratory or commercial. 1.4  This test method measures the force required to separate a test strip of material containing the seal. It also identifies the mode of specimen failure. 1.5  This test method differs from Test Method F2824 . Test Method F2824 measures mechanical seal strength while separating an entire lid (cover/membrane) from a rigid or semi-rigid round container. 1.6  The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Seal Strength of Flexible Barrier Materials