79.080 半成品材 标准查询与下载

22/30414942 DC BS ISO 4562 实木镶木地板 实木复合地板条的分类

BS ISO 4562. Solid wood parquet. Classification of parquet strips

22/30414610 DC BS ISO 4561 原木镶木地板块 实木复合地板块的分类

BS ISO 4561. Wood raw parquet blocks. Classification of parquet blocks

22/30414607 DC BS ISO 4556 原木镶木地板块 一般特征

BS ISO 4556. Wood raw parquet blocks. General characteristics

T/JSQA 136-2022 石塑地板

分类：按正表面情况分、按使用场合分、按背面情况分、按拼接方式分； 要求：外观质量、规格尺寸及偏差、理化性能、有害物质限量。

The stone—polymer floor

CSA O112.9-2021 结构木材产品粘合剂的评估（外部暴露）

1 Domaine d’application 1.1 Cette norme énonce les exigences relatives à l’évaluation des adhésifs utilisés pour coller les matériaux en bois massif dans les produits de bois de charpente conçus pour un usage extérieur. Note : Voir l’annexe C pour de plus amples renseignements sur l’exposition extérieure et sur les autres catégories d’exposition à la moisissure des adhésifs pour bois de charpente. 1.2 Cette norme énonce les exigences particulières relatives à l’évaluation de la résistance des adhésifs à : a) cisaillement causé par une charge de compression; réalisée en environnement sec et en environnement humide; b) délamination pendant une exposition accélérée au mouillage et au séchage; et c) déformation sous contrainte de cisaillement statique pendant une exposition à la chaleur, à l’humidité élevée ou à une combinaison de chaleur et d’humidité élevée. 1.3 Cette norme ne s’applique pas aux adhésifs destinés à un usage sous le niveau du sol, en contact avec le sol ou dans les applications maritimes. 1.4 Cette norme ne concerne pas l’évaluation des effets des traitements chimiques du bois sur la performance des adhésifs. 1.5 Dans cette norme, le terme « doit » indique une exigence, c’est-à-dire une prescription que l’utilisateur doit respecter pour assurer la conformité à la norme; « devrait » indique une recommandation ou ce qu’il est conseillé mais non obligatoire de faire; et « peut » indique une possibilité ou ce qu’il est permis de faire. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d’informatives (facultatives) pour en préciser l’application. 1.6 Les valeurs indiquées en unités SI sont les valeurs officielles dans cette norme. Les valeurs entre parenthèses sont données à titre d’information et pour fin de comparaison seulement.

Évaluation des adhésifs pour produits de bois de charpente (exposition extérieure) This document is provided to SCC for non-commercial, internal use only. For greater clarity, no further reproduction or distribution is permitted. Resale is

T/GXAS 255-2021 荔浦实木衣架

本文件界定了荔浦实木衣架涉及的术语和定义，给出了分类，规定了荔浦实木衣架的尺寸及偏差、外观质量及等级、理化性能技术等要求，描述了相应的检验方法、检验规则，规定了标志、包装、贮存、运输等方面的内容。 本文件适用于荔浦市生产的实木衣架的检验评定。

Lipu solid wood hanger

T/CAS 542-2021 空气净化器去除小粒径污染物的 技术要求和评价方法

本标准规定了空气净化器（以下简称“净化器”)去除小粒径污染物的技术要求、试验方法和评价方法。 本标准适用于明示具有去除小粒径污染物能力的空气净化器。 本标准不适用于医疗及工业用净化器。

Technical requirements and evaluation methods of air cleaner removing performance for small particles pollutant

21/30442401 DC BS EN 13489 木地板和镶木地板 多层镶木地板元件

BS EN 13489. Wood-flooring and parquet. Multi-layer parquet elements

ASTM D7032-21 确定木塑复合材料和塑料木材甲板板、楼梯踏板、防护装置和扶手性能等级的标准规范

1.1 This specification covers procedures to establish a performance rating for wood-plastic composite and plastic lumber for use as exterior deck boards, stair treads, guards, and handrails. The purpose of this specification is to establish a basis for code recognition of these products or systems in exterior applications. NOTE 1—While wood-plastic composites contain wood or other cellulosic materials, the presence of wood or other cellulosic materials in plastic lumber is not required by this specification. Due to non-wood materials in wood-plastic composites and plastic lumber the structural, physical, fire, and other attributes may not be similar to those of wood. NOTE 2—The products addressed in this standard are considered combustible. No fire response characteristic is required in this specification except for flame spread index as determined in accordance with Test Method E84. 1.1.1 The plastic component of wood-plastic composites and plastic lumber covered by this specification shall consist primarily of thermoplastics. 1.2 Deck boards, stair treads, guards, and handrails covered by this specification are permitted to be of any code compliant shape and thickness (solid or non-solid). 1.3 Wood-plastic composites and plastic lumber are produced in a broad range of fiber and/or resin formulations. It is recognized that the performance requirements in this specification are valid for any material or combination of materials used as deck boards, stair treads, guards, or handrails. 1.4 Details of manufacturing processes are beyond the scope of this specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 Table of Contents: Section Scope 1 Referenced Documents 2 Terminology 3 General Requirements 4 Sampling 4.1 Sample Size 4.2 Conditioning 4.3 Flexural Tests 4.4 Temperature and Moisture Effects 4.5 Ultraviolet (UV) Resistance Test 4.6 Freeze-Thaw Resistance Test 4.7 Biodeterioration Tests 4.8 Fire Performance Tests 4.9 Deck Board Performance Requirements 5 General 5.1 Flexural Performance Tests 5.2 Determination of the Unadjusted Allowable Load 5.3 Creep-Recovery Test 5.4 Mechanical Fastener Holding Tests 5.5 Slip Resistance Test 5.6 Guard and Handrail Performance Requirements 6 General 6.1 Guardrail System Test Requirements 6.2 Oneand Two-Family Dwelling Requirements 6.2.1.1 Handrail Test Requirements (Concentrated Load) 6.3 Report 7 Independent Inspection 8 Manufacturing Standard 9 Precision and Bias 10 Keywords 11 Two-Span Test Method Annex A1 Commentary Appendix X1 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 This specification is under the jurisdiction of ASTM Committee D07 on Wood and is the direct responsibility of Subcommittee D07.02 on Lumber and Engineered Wood Products. Current edition approved Nov. 1, 2021. Published December 2021. Originally approved in 2004. Last previous edition approved in 2017 as D7032 – 17. DOI: 10.1520/D7032-21. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 8QLYHUVLW\RI7RURQWR 8QLYHUVLW\RI7RURQWR SXUVXDQWWR/LFHQVH$JUHHPHQW1RIXUWKHUUHSURGXFWLRQVDXWKRUL]HG 'RZQORDGHGSULQWHGE\ &RS\ULJKWE\$670,QW O DOOULJKWVUHVHUYHG 6DW'HF*07 2. Referenced Documents

Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails

PN-EN 17456-2021-09 E 木地板和镶木地板多层元件顶层和底层分层的测定试验方法

Wood flooring and parquet--Determination of top and bottom layer delamination of multilayer elements--Test method

PN-EN 13647-2021-09 E 木地板和木镶板和覆层几何特性的测定

Wood flooring and wood panelling and cladding--Determination of geometrical characteristics

T/ZZB 2428-2021 拼花镶嵌实木复合地板

本文件规定了拼花镶嵌实木复合地板的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于拼花镶嵌实木复合地板。

Engineered wood with inlay parquet flooring

T/ZZB 2405-2021 全实木榫拼门

本文件规定了全实木榫拼门的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、安装要求及质量承诺等。 本文件适用于全实木榫拼门。

Tenon and mortise door of full solid wood

T/ZZB 2298-2021 实木门

本文件规定了实木门的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量承诺等。 本文件适用于室内用实木门。

Solid wood door

T/ZZB 2266-2021 阻燃木质复合地板

本文件规定了阻燃木质复合地板的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量承诺等。 本文件适用于阻燃木质复合地板。

Composite wood floor of fire retardant

T/ZZB 2253-2021 户外重组竹地板

本文件规定了户外重组竹地板的术语和定义、基本要求、检验方法、检验规则及包装、标志、运输和贮存、质量承诺等。 本文件适用于不高于 150 ℃热处理的户外用重组竹地板。

Outdoor bamboo scrimber flooring

OENORM EN 17456-2021 木地板和镶木地板 多层元件顶层分层的测定 试验方法

Wood flooring and parquet - Determination of top layer delamination of multilayer elements - Test method

GSO ASTM D8023:2021 木结构用圆木销钉（钉）的标准规范

1.1 This specification covers standardizing the dimensions and materials for the manufacture of round wood dowels (pegs) used in the fabrication of connections in wood construction. The referencing of this specification in design, construction, and purchase order documents is intended to provide some assurance that the round wood dowels to be used in an assembly meet minimum materials quality standards and that dimensions for fabrication and finish can be relied on to ensure connection performance. This specification provides regulatory agencies with a set of standards by which to judge the acceptability of round wood dowels encountered in the field and in fabricators’ shops. 1.2 This specification only addresses the standardization and manufacture of round wood dowels. Other types of wood dowels, such as sawn or cleaved pegs, are outside the scope of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values in parentheses are for information only. 1.4 Safety Hazards—There are no known hazards with the use of this specification. The products manufactured to this specification should not be brittle or difficult to install with proper tools. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction

LST EN 17456-2021 木地板和镶木地板 多层元件顶层分层的测定 试验方法

Wood flooring and parquet - Determination of top layer delamination of multilayer elements - Test method

LY/T 3274-2021 木塑复合材料分类及其等级划分

Classification and grade classification of wood-plastic composite materials