81.100 玻璃和陶瓷生产设备 标准查询与下载

EN 13035-6:2006 平板玻璃的制造,处理和加工机械及装置.安全要求.第6部分:切割机械

1.1 This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines for the break-out of flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to the break-out operation (opening the cut) of cutting machines for laminated glass (see EN 13035-7). 1.4 This European Standard is not applicable to the treatment of waste flat glass such as crushing and/or charging of waste flat glass into bins, containers. 1.5 This European Standard does not apply to the significant hazards of conveyors. If there are specific hazards which arise by the co-operation of conveyors with machines for break-out of flat glass, appropriate measures are specified. 1.6 This European Standard is not applicable to machines for break-out of flat glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out Incorporates Amendment A1: 2009

EN 13035-5:2006 平板玻璃制造,处理和加工用机械和设备.安全性要求.第5部分:堆积和卸垛的机械和安装

1.1 This European Standard applies for machines and installations for stacking and de-stacking that are specifically designed for building-up or taking down upright stacks of flat glass sheet by sheet including unloading and loading of single sheets of flat glass from or onto machines or transport devices (conveyors). NOTE For sketches with examples of typical constructions, see Annex A (informative), Figures A.1 to A.9. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines and installations for stacking and de-stacking flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to the significant hazards of conveyors and other machines for the manufacture, treatment and processing of flat glass, e.g. tilting tables, equipment for storage of flat glass, such as stillages. If there are specific hazards which arise by the co-operation of this machinery and equipment with machines and installations for stacking and de-stacking, appropriate measures are specified. 1.4 This European Standard is not applicable to building up or taking down stacks by means of cranes that are temporarily equipped via hook with load-lifting attachments with suction cups to lift flat glass. 1.5 When compiling this European Standard, it was assumed that lifting movements are only used as part of full automatic machines and that the related hazards are not significant. 1.6 This European Standard is not applicable to machines and installations for stacking and de-stacking which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking Incorporates Amendment A1: 2009

EN 13035-7:2006 平板玻璃的制造,处理和加工机械及装置.安全要求.第7部分:夹层玻璃切割机

1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). 1.4 This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. 1.5 This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. 1.6 This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass Incorporates Amendment A1: 2009

KS L 3401-2006(2011) 坩埚玻璃

Crucible for Glass melting

NF E58-825:2006 陶瓷机器.安全.优质粘土瓦的装卸

Ceramic machines - Safety - Loading and unloading of fine clay tiles.

DB44/ 294-2006 燃气窑炉系统安全技术规范

本规范规定了燃气窑炉系统中窑炉安全结构、气瓶、贮罐、瓶组间、气化器、气化间、燃气管道及其配套的附属设备等方面的安全技术要求，试验方法、检验规则和安全管理。本规范适用于广东省内，以可燃气体为燃料，用于陶瓷制品烧成、烤彩、陶瓷化工原料煅烧以及硅酸盐产品烧制的梭式窑、隧道窑、辊道窑等各式工业用燃气窑炉系统的设计、制造、安装、使用、检验。本规范所指的可燃气体，主要是指液化石油气和天然气。

Safety technical specification for gas furnace system

DIN EN 13102:2006 陶瓷机器.安全.细粘土砖的装卸.德文版本EN 13102-2005

1.1 This European Standard contains the requirements for safety for the design and installation of machines to set and dehack wall tiles and floor tiles or frames for tiles and to load/unload tiles to/from cars and containers. 1.2 This European Standard deals with all significant hazards pertinent to machines for setting and dehacking of fine clay tiles, when they are used as intended and under the conditions foreseen by the manufacturer (see 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.#,,#

Ceramic machines - Safety - Loading and unloading of fine clay tiles; German version EN 13102:2005

BS EN 13102:2005+A1:2008 陶瓷机械.安全性.细泥瓷砖的装载和卸载

1.1 This European Standard applies to: machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3). 1.2 !This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not deal with noise. This European Standard deals with the preventive measures to minimise these hazards arising from the commissioning, the operation and maintenance." 1.3 The interface with the transport system for stacks, containers is covered by this European Standard for some examples not for all possibilities (see e.g. 5.6.4, 5.6.7). 1.4 This European Standard is not applicable to: machines for setting and dehacking of split tiles and roof tiles; auxiliary machinery such as vacuum generators. 1.5 This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Loading and unloading of fine clay tiles

BS EN 13102:2005 陶瓷机械.安全.细黏土砖的装载和卸载

1.1 This European Standard applies to: ? machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1); ? machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4); ? machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3). 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This standard deals with the preventive measures to minimise these hazards which can arise during commissioning, the operation and maintenance. 1.3 The interface with the transport system for stacks, containers is covered by this European Standard for some examples not for all possibilities (see e.g. 5.6.4, 5.6.7). 1.4 This European Standard is not applicable to: ? machines for setting and dehacking of split tiles and roof tiles; ? auxiliary machinery such as vacuum generators. 1.5 This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Loading and unloading of fine clay tiles

BS EN 13367:2005+A1:2008 陶瓷机器.安全性.转载平台和中转车

1.1 This European Standard applies for the design, installation and commissioning of transfer platforms and cars and ancillary devices for the process related transport of ceramic material on rails. The rails, which are considered to be horizontal and the movement of vehicles in equipment and machinery connected with the process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered. 1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Noise is not a significant hazard. This document deals with the preventive measures to minimise these hazards which can arise during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to: 1.3.1 Kilns and dryers (see EN 746-1:1997), machinery for setting and dehacking of heavy clay and refractory, products and machinery for loading and unloading of fine clay tiles; 1.3.2 Retrial, packaging and storage of finished products; 1.3.3 Transport of cars with not rail mounted equipment e.g. with driverless trucks (see EN 1525:1997); 1.3.4 Transfer platforms and cars which are driven by human power. 1.4 This European Standard is not applicable to transfer platforms and cars and ancillary devices which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Transfer platforms and cars

EN 13367:2005 陶瓷机器.安全.传送平台和传送车.包含修改件A1-2008

This European Standard applies forThe design, installation and commissioning of transfer platforms and cars and ancillary devices forThe process related transport of ceramic material on rails.The rails, which are considered to be horizontal andThe movement of vehicles in equipment and machinery connected withThe process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered.This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, whenThey are used as intended and underThe conditions foreseen byThe manufacturer (see Clause 4). Noise is not a significant hazard.This document deals withThe preventive measures to minimiseThese hazards which can arise during commissioning,The operation and maintenance.This European Standard is not applicable to:Kilns and dryers (see EN 746-1:1997), machinery for setting and dehacking of heavy clay and refractory, products and machinery for loading and unloading of fine clay tiles; Retrial, packaging and storage of finished products; Transport of cars with not rail mounted equipment e. g. with driverless trucks (see EN 1525:1997); Transfer platforms and cars which are driven by human power.This European Standard is not applicable to transfer platforms and cars and ancillary devices which are manufactured beforeThe date of publication of this European Standard by CEN.

Ceramic machines - Safety - Transfer platforms and cars (Incorporates Amendment A1: 2008)

JC/T 763-2005 陶瓷工业隧道窑热平衡热效率测定与计算方法

本标准规定了建筑卫生陶瓷隧道窑的热平衡、热效率的测定与计算方法。 本标准适用于生产建筑卫生陶瓷产品中，使用液体、固体和气体燃料的隧道窑热平衡、热效率测定与计算。对于生产陶瓷产品的其它窑炉的热平衡、热效率的测定与计算也可参照采用本标准。

Measurement and calculation method of heat balance and thermal efficiency of ceramic industral tunnel kiln

EN 13102:2005 陶瓷机械.安全.细黏土砖的装载和卸载.包含修改件A1-2008

This European Standard applies to: machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3).This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard does not deal with noise.This European Standard deals with the preventive measures to minimise these hazards arising from the commissioning, the operation and maintenance. The interface with the transport system for stacks, containers is covered byThis European Standard for some examples not for all possibilities (see e. g. 5.6.4, 5.6.7).This European Standard is not applicable to: machines for setting and dehacking of split tiles and roof tiles; auxiliary machinery such as vacuum generators.This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Loading and unloading of fine clay tiles (Incorporates Amendment A1: 2008)

BS EN 13042-2:2004 空心玻璃生产、处理和加工用机械和设备.安全要求.给料用搬运机械

1 This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass. 2 This document deals with all significant hazards, hazardous situations and events relevant to machines for feeding, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 3 This does not deal with the exclusive feeding with shearers (shears) alone with the transport of the melted glass post by its own weight in free fall or by trueing (gob feeder, see prEN 13042-1). 4 This document is not applicable to handling machines for feeding which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Handling machines for feeding

BS EN 13042-2:2004+A1:2009 空心玻璃制造,处理和加工用机械和设备.安全要求.给料用搬运机械

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Handling machines for feeding

EN 13042-2:2004 空心玻璃生产,处理和加工用机械和设备.安全要求.第2部分:给料用搬运机械.包含修改件A1-2009

This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass.This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance.This European Standard does not deal with the exclusive feeding with shears alone, with the transport of the melted glass post by its own weight in free fall or by trueing (gob feeder, see EN 13042-1).This document is not applicable to handling machines for feeding which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (Incorporates Amendment A1: 2009)

BS EN 13042-5:2003 空心玻璃生产、处理和加工用机械和设备.安全要求.压力机

1 This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses. 2 This standard deals with all significant hazards, hazardous situations and events relevant to glass presses when they are used as intended and under the conditions foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 3 This standard does not deal with forming machines for hollow glass where the press operation is only a part of the hot-forming process, such as the press/blow process of IS machines (see prEN 13042-3). 4 This standard does not deal with gob feeders (see prEN 13042-1) and handling machines for feeding (see prEN 13042-2) which are self-standing machines and dealt with in other standards of the series regarding machinery used in the production of hollow glass. 5 This document is not applicable to presses which are manufactured before the date of publication of this document by CEN. 6 This standard deals only with hazards arising from the application of components which may be used in glass presses, such as motors and continuous handling equipment. More particular safety requirements are dealt with within standards more specific to that component, including noise. 7 This standard does not deal with equipment for cooling and waste ejection with air or heating from an outside system.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses

BS EN 13042-5:2003+A1:2009 中空玻璃生产、处理和加工用机械和设备.安全要求.压力机

This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses

BS EN 13035-3:2003+A1:2009 平板玻璃的制造、处理和加工用机械和设备.安全性要求.切割机

1.1 This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. 1.2 !This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance." 1.3 This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 1.4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see !EN 13035-5 and EN 13035-6"). 1.5 This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 1.6 This standard does not apply to cutting of laminated glass (see !EN 13035-7"). 1.7 This standard does not apply to cutting while the glass is moving. 1.8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines

BS EN 13035-4:2003+A1:2009 平板玻璃的制造、处理和加工用机械和设备.安全要求.倾斜台

This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or – supported at the lower edge – leaning against a supporting surface.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Tilting tables