81.100 玻璃和陶瓷生产设备 标准查询与下载

DS/EN 13042-3+A1:2009 制造、处理和加工中空玻璃的机器和设备-安全要求-第3部分：IS 机器

1.1 This European Standard applies to the design and installation of IS machines including the gob distributor and machine conveyor.1.2 ! This European Standard deals with the significant hazards, hazardous situations and events relevant to IS machines, when they are used as intended and under the conditions of misuse which are reasonably foresee-able by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance.""""1.3 This European Standard does not deal with gob feeders (see EN 13042-1) and handling machi

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

DS/EN 13042-2+A1:2009 制造、处理和加工中空玻璃的机器和设备-安全要求-第2部分：上料搬运机械

This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass.1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

DS/EN 13042-5+A1:2009 制造、处理和加工中空玻璃的机器和设备-安全要求-第5部分：压力机

1.1 This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses.1.2 !This standard deals with all significant hazards, hazardous situations and events relevant to glass presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks from the significant hazards commissioning, opera

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

EN 13035-3:2003+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第3部分:切割机

This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see EN 13035-5 and EN 13035-6). This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. This standard does not apply to cutting of laminated glass (see EN 13035-7). This standard does not apply to cutting while the glass is moving. This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

EN 13042-2:2004+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第2部分:进料搬运机

This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass. This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance. This European Standard does not deal with the exclusive feeding with shears alone, with the transport of the melted glass post by its own weight in free fall or by trueing (gob feeder, see EN 13042-1). This document is not applicable to handling machines for feeding which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

EN 13042-3:2007+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第3部分:IS机器

This European Standard applies to the design and installation of IS machines including the gob distributor and machine conveyor. This European Standard deals with the significant hazards, hazardous situations and events relevant to IS machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance. This European Standard does not deal with gob feeders (see EN 13042-1) and handling machines for feeding (see EN 13042-2) which are self-standing machines used for the delivery of portions of melted glass to hollowglass-forming machines such as glass presses (see EN 13042-5). This European Standard is not applicable to IS machines which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

EN 13042-5:2003+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第5部分:印刷机

This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses. !This standard deals with all significant hazards, hazardous situations and events relevant to glass presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance." This standard does not deal with forming machines for hollow glass where the press operation is only a part of the hot-forming process, such as the press/blow process of IS machines (see !EN 13042-3"). This standard does not deal with gob feeders (see !EN 13042-1") and handling machines for feeding (see !EN 13042-2") which are self-standing machines and dealt with in other standards of the series regarding machinery used in the production of hollow glass. This document is not applicable to presses which are manufactured before the date of publication of this document by CEN. This standard deals only with hazards arising from the application of components which may be used in glass presses, such as motors and continuous handling equipment. More particular safety requirements are dealt with within standards more specific to that component, including noise. This standard does not deal with equipment for cooling and waste ejection with air or heating from an outside system.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

DIN EN 13367:2009 陶瓷设备.安全性.传送平台和传送车,德文版本EN 13367:2005+A1:2008

Ceramic machines - Safety - Transfer platforms and cars; German version EN 13367:2005+A1:2008

DIN EN 13102:2009 陶瓷机器 安全性 细粘土砖的装卸

1.1 This European Standard applies to: machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1 ); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4); -- machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3). 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not deal with noise. This European Standard deals with the preventive measures to minimise these hazards arising from the commissioning, the operation and maintenance. 1.3 The interface with the transport system for stacks, containers is covered by this European Standard for some examples not for all possibilities (see e.g. 5.6.4, 5.6.7). 1.4 This European Standard is not applicable to: -- machines for setting and dehacking of split tiles and roof tiles; -- auxiliary machinery such as vacuum generators. 1.5 This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Loading and unloading of fine clay tiles (includes Amendment A1:2008); English version of DIN EN 13102:2009-05

LST EN 13102-2006+A1-2009 陶瓷机器 安全 细粘土砖的装卸

Ceramic machines - Safety - Loading and unloading of fine clay tiles

DS/EN 13102+A1:2009 陶瓷机器 安全 细粘土砖的装卸

This European Standard applies to:- machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1);- machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4);- machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3).1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the condi

Ceramic machines - Safety - Loading and unloading of fine clay tiles

LST EN 13367-2005+A1-2009 陶瓷机器 安全 转移平台和汽车

Ceramic machines - Safety - Transfer platforms and cars

DS/EN 13367+A1:2008 陶瓷机器 安全 转移平台和汽车

This European Standard applies for the design, installation and commissioning of transfer platforms and cars and ancillary devices for the process related transport of ceramic material on rails. The rails, which are considered to be horizontal and the movement of vehicles in equipment and machinery connected with the process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered.1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, when they are used as intended and under the conditions foreseen by the manufacturer (s

Ceramic machines - Safety - Transfer platforms and cars

NF E58-822*NF EN 13367+A1:2008 陶瓷机械.安全性.传送平台和传送车

Ceramic machines - Safety - Transfer platforms and cars.

EN 13102:2005+A1:2008 陶瓷机器.安全性.细粘土砖的装卸

This European Standard applies to: machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3). This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not deal with noise. This European Standard deals with the preventive measures to minimise these hazards arising from the commissioning, the operation and maintenance. The interface with the transport system for stacks, containers is covered by this European Standard for some examples not for all possibilities (see e. g. 5.6.4, 5.6.7). This European Standard is not applicable to: machines for setting and dehacking of split tiles and roof tiles; auxiliary machinery such as vacuum generators. This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Loading and unloading of fine clay tiles

EN 13367:2005+A1:2008 陶瓷机械.安全性.传送平台和传送车

This European Standard applies for the design, installation and commissioning of transfer platforms and cars and ancillary devices for the process related transport of ceramic material on rails. The rails, which are considered to be horizontal and the movement of vehicles in equipment and machinery connected with the process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered. This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Noise is not a significant hazard. This document deals with the preventive measures to minimise these hazards which can arise during commissioning, the operation and maintenance. This European Standard is not applicable to: Kilns and dryers (see EN 746-1:1997), machinery for setting and dehacking of heavy clay and refractory, products and machinery for loading and unloading of fine clay tiles; Retrial, packaging and storage of finished products; Transport of cars with not rail mounted equipment e. g. with driverless trucks (see EN 1525:1997); Transfer platforms and cars which are driven by human power. This European Standard is not applicable to transfer platforms and cars and ancillary devices which are manufactured before the date of publication of this European Standard by CEN.

Ceramic machines - Safety - Transfer platforms and cars

DIN EN 13035-2:2008 平面玻璃的制造、处理和加工用机械和设备.安全要求.第2部分:工厂外的存储、搬运和运输设备

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage (as defined in 3.2.1), handling (as defined in 3.2.2) and transportation (as defined in 3.2.3) of flat glass outside the factory (as defined in 3.1.1) and including stillages, pallets, frails fixed to vehicles, in- loader vehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used for road transport and on building sites. 1.2 Specific hazards due to the use inside the factory are dealt with in EN 13035-1. 1.3 This standard deals only with the devices which are directly in contact with the glass. This standard does not apply to manual handling equipment such as carrying straps and vacuum pads. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass. This European Standard does not apply to equipment for the transport by other ways than on road e.g. by ship or train, and the transportation of glazed windows/frames. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of fiat glass, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass outside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory; English version of DIN EN 13035-2:2008-06

BS EN 13035-5:2006 平面玻璃的制造、处理和加工用机械和设备.安全要求.堆垛和卸垛用机械和设备

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Machines and installations for stacking and de-stacking

BS EN 13035-11:2006+A1:2010 平板玻璃的生产、处理和加工用机械和设备.安全性要求.钻床

1.1 This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary machines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. 1.2 !This European Standard deals with the significant hazards, hazardous situations and events relevant to drilling machines for flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4)." This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. !Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary." 1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5). 1.4 This European Standard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Drilling machines

BS EN 13035-7:2006 平面玻璃的制造、处理和加工用机械和设备.安全要求.薄板状玻璃用切割机

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines for laminated glass