91.090 外围建筑物 标准查询与下载

OENORM EN 13241-2020 工业、商业、车库门和大门 产品标准、性能特征

Industrial, commercial, garage doors and gates - Product standard, performance characteristics

T/ZZB 1967-2020 免焊装配式建筑幕墙支承结构

本文件规定了免焊装配式建筑幕墙支承结构的术语、定义和符号，分类、型号、标记、规格，基本要求，技术要求，试验方法，检验规则，标志、包装、运输和贮存，质量承诺。 本文件适用于建筑幕墙的支承结构系统。

Solderless assembled curtain wall supporting structure

prEN 13241-2020 工业、商业、车库门和大门 产品标准、性能特征

Industrial, commercial, garage doors and gates - Product standard, performance characteristics

DB21/T 3343-2020 建筑挡土墙技术规程

Technical specifications for building retaining walls

T/BBA 01-2020 家居门窗 卧室窗

标准在使用功能方面进行了细化，考虑个性化定制需求，有些性能指标在符合国家和行业标准的同时，根据消费者使用习惯增加相关要求。例如不同居室功能、在不同位置提升门窗的物理性能指标，增加消费者关注的舒适性指标、个性化要求和美观要求。 一般要求有：型材、玻璃、五金件、密封材料、通风器、智能控制装置。 特殊性能及使用功能有：抗风携碎物冲击性能、防沙尘性能、防闯入性能、 智能控制性能、防护措施、私密性、窗扇防坠落、反复启闭耐久性能等。 有害物质限量：甲醛释放量、可溶性重金属含量。

Home doors and windows bedroom windows

T/ZS 0136-2020 既有住宅加装电梯技术规范（试行）

目次 1总则 2 术语 3 基本规定 4设计 4.1 一般规定 4.2 建筑设计 4.3 结构设计 4.4 设备设计 5施工 5.1一般规定 5.2 土建施工 5.3 设备安装 5.4 装饰装修 5.5 施工现场管理 6 质量验收 6.1 一般规定 6.2 土建质量验收 6.3 设备安装质量验收 6.4 装饰装修质量验收 7 档案归档 7.1一般规定 7.2 归档要求 附录A预制基坑作业 附录B 现场基坑作业 附录C 钢结构定位 附录D加装电梯起吊工具清单 附录E 加装电梯工程档案归档 附录F 建筑设计示意图 本规范用词说明 引用标准名录

Technical Specifications for Elevator Installation in Existing Residences (Trial)

T/ZS 0133-2020 城市立体绿化技术规范

目次 1  总  则　 2  术  语　 3  基本规定　 4  屋顶绿化　 4.1  设计　 4.2  施工　 4.3  验收　 4.4  养护管理　 5  垂直绿化　 5.1  设计　 5.2  施工　 5.3  验收　 5.4  养护管理　 6  高架绿化　 6.1  设计　 6.2  施工　 6.3  验收　 6.4  养护管理　 本规范用词说明　 引用标准名录　

Technical specifications for urban three-dimensional greening

ASTM F2548-20 安全用途的钢板网系统的标准规范

1.1 This specification covers selection and installation of expanded metal fence systems for applications on new or retrofit fences for commercial, industrial, governmental, or institutional facilities as applicable to homeland security, or where the possibility of malevolent incursion is significant. See Fig. 1 for typical examples of expanded metal fence applications. This type of fence system is not recommended for residential or public recreational facilities such as pools, schools, and kindergartens. 1.2 This specification is intended to guide those responsible for or concerned with the design and installation of an expanded metal fence system capable of denying or delaying unwanted access into or out of an area. 1.3 No recommendation is made or implied here as to the merits of the product from any particular manufacturer. Choice of component selection for the expanded metal system should be made by the writer of the project specification based on their own perception of the product’s merit and the consequence of a malevolent incursion. 1.4 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This specification does not purport to address all of the safety and security concerns, if any, associated with homeland security. It is the responsibility of the user of this standard to establish the required and appropriate level of security. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Expanded Metal Fence Systems for Security Purposes

IEC 60335-2-95:2019 家用和类似电器 - 安全 - 第2-95部分:用于住宅用途的垂直移动车库门的驱动器的特殊要求

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

IEC 60335-2-95:2019 RLV 家用和类似用途电器.安全.第2-95部分:住宅用垂直移动车库门驱动器的特殊要求

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

T/ZS 0113-2020 屋顶绿化技术规程

目 次 1 总 则 2 术 语 3 基本规定 4 设 计 4.1 类型设计 4.2 荷载设计 4.3 防水层设计 4.4 隔根层设计 4.5 排（蓄）水层设计 4.6 蓄水种植层设计 4.7 蓄水种植层设计 4.8 基质层设计 4.9 基质层设计 4.10 植物设计 4.11 园林小品设计 4.12 照明系统设计 4.13 浇灌系统设计 4.14 防风支护设计 5 施 工 5.1 施工准备 5.2 施工过程 5.3 防水层 5.4 隔根层 5.5 排水层 5.6 过滤层 5.7 种植层 6 验 收 7 养护与管理 7.1 灌溉 7.2 施肥 7.3 修剪 7.4 病虫害防治 7.5 除草 7.6 极端气候应急管理 7.7 附属设施维护 附录 A 屋顶绿化植物种类推荐表 本标准用词说明 引用标准名录

Roof Greening Technical Regulations

ASTM F1345-10a(2019) 锌-5%铝混合稀土合金涂层钢链环栅栏织物的标准规范

1.1 This specification covers zinc-5 % aluminummischmetal (Zn-5A1-MM) alloy-coated steel chain-link fence fabric, Zn-5A1-MM alloy-coated, before weaving. 1.2 The values stated in inch-pound units are to be regarded as the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

ASTM F537-01(2019) 木栅栏和相关材料的设计、制造和安装的标准规范

1.1 This specification covers all wood fences, including fences combined with wood and other materials. 1.2 This specification covers three classifications of wood fences. This specification is based on fundamental construction principles combined with long-standing traditional fence building skills, and covers the design, fabrication, and installation practices of wood fences. 1.3 This specification also provides a systematic method of purchase, inspection with basis for rejection, and certification of manufactured wood fences by the fence industry. 1.4 The values stated in inch-pound units are to be regarded as the standard. Acceptable industry-wide SI equivalents are being developed. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

ASTM F1999-14(2019) 硬质聚氯乙烯（PVC）栅栏系统安装的标准实施规程

1.1 This practice covers the minimum requirement for and methods of installation for rigid poly(vinyl chloride) (PVC) fencing systems and fence accessories in areas where the maximum frost penetration does not exceed 30 in. [76 cm]. In all cases, refer also to the specific manufacturer’s instructions for installation. 1.2 This practice is intended to guide those responsible for or concerned with installation of rigid (PVC) fence systems. 1.3 This practice does not preclude any test method that is proven to give equal or better performance under any weather, soil, or frost conditions. 1.4 End-use and applicable code requirements shall be considered in the choice of fence style, spacing, height, and installation method. 1.4.1 Paddock fencing for livestock may need to be more durable than perimeter fence. 1.4.2 Residential fence styles may not be designed for balcony or guardrail use. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in brackets are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

ASTM F567-14a(2019) 链条围栏安装标准实践

1.1 This practice covers the installation procedure for chainlink fence. 1.2 This practice is intended primarily to guide those responsible for or concerned with the installation of chain-link fence. 1.3 This practice does not intend to preclude any practice that has proven equal to or given better performance under varying conditions, that is, location, weather, intended use, materials, etc. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 13. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation of Chain-Link Fence

ASTM F3342-19 建筑工地临时围栏应用的标准指南

1.1 This guide covers a variety of materials and methods used in the construction of temporary fences. 1.2 Temporary fences are physical barriers used to define and designate the boundary of construction sites. 1.3 Temporary fences are intended to be installed before any construction activity starting and removed at the end of the construction phase. The duration of service can vary; consideration should be given to the length of time the temporary fence will be in use. 1.4 When determining and specifying materials and installation methods, investigate contract specifications, contract documents, site plan fence location, and, possibly, local codes. Before installation, review and inspect existing site conditions. In some cases, a permanent fence installation should be used as temporary fencing. 1.5 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Temporary Fence Applications for Construction Sites

CAN/CGSB-138.4-2019 勾花栅栏门

1 Scope This standard applies to gates used in conjunction with chain link fence used in commercial and industrial applications. Some quantities and dimensions used in this standard are given in SI units with imperial equivalents shown in brackets where appropriate. All imperial measurements are industry standard nominal measurements. All metric references are closest conversions to industry standard. The imperial units are regarded as being official in the event of dispute. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use.

Gates for chain link fence

ASTM F2957-13(2019)e1 装饰用铝栅栏系统的标准规范

1.1 This specification establishes the minimum requirements for architecturally coated, tubular picket, ornamental aluminum fence systems. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Ornamental Aluminum Fence Systems

CAN/CGSB-138.3-2019 勾花网的安装

1 Scope This standard applies to the installation of chain link fence used in commercial and industrial applications. It gives the requirements for chain link fence installation in earth, rock, or rock with overburden of earth. Some quantities and dimensions used in this standard are given in SI units with imperial equivalents shown in brackets where appropriate. All imperial measurements are industry standard nominal measurements. All metric references are closest conversions to industry standard. The imperial units are regarded as being official in the event of dispute. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use.

Installation of chain link fence

CAN/CGSB-138.1-2019 勾花网用布

1 Scope This standard gives the requirements for various properties of chain link fence fabric used in commercial and industrial applications. Some quantities and dimensions used in this standard are given in SI units with imperial equivalents shown in brackets where appropriate. All imperial measurements are industry standard nominal measurements. All metric references are closest conversions to industry standard. The imperial units are regarded as being official in the event of dispute. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use.

Fabric for chain link fence