91.090 外围建筑物 标准查询与下载

ASTM F654-07(2017) 住宅连锁围栏门标准规范

1.1 This specification covers detail requirements for residential chain link fence gates, gate posts, and accessories. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Residential Chain Link Fence Gates

ASTM F1043-17a 钢铁工业护栏框架上强度和防护涂层的标准规范

1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.) 1.1.1 Caution Regarding Windload—If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered and local wind conditions. 1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

ASTM F934-96(2017) 聚合物涂层链条栅材料的标准颜色标准规范

1.1 This specification covers standard colors for coated chain link fence materials such as chain link fence fabric, tension wire, posts, rails, gate frames, and fittings. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

ASTM F2049-11(2017) 公共 商业和多户住宅户外游乐区的栅栏/障碍标准安全性能规范

1.1 This specification provides the recommended minimum requirements for denoting various types of fences/barriers for the protection of children’s outdoor play spaces in public, commercial, and multi-family residential use locations. This specification excludes individual single family residential use play equipment locations. Interior fences located in a play area that has a perimeter fence established shall only have to comply with the latch height requirement indicated in 7.6.2. 1.2 This specification provides for the safety of occupants in play areas or zones as it pertains to vehicular intrusion as well as other participant intrusion, and for children containment or entry/exit. This specification has the intent to also keep children inside a predetermined area in an effort to enhance supervision; to keep children from running out of the area into water and other hazards; to minimize the likelihood of facial lacerations on low gate and fence hardware; to minimize the likelihood of abduction; and to restrict access to railroads, highways, roads, and other such hazards. 1.3 This specification does not choose the product components for the fence system, the choice of which should be made by the operators of the play space and their specification writers or drafters based upon their determination of the merits of the products that could be used. 1.4 The values stated in inch-pound units are to be regarded as standard. The SI values given in parentheses are for information only. 1.5 This specification does not purport to address the aspect of safety within a play area or zone. It is the responsibility of the user of this specification to establish appropriate safety practices as related to the play area and determine the applicability of regulatory requirements prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

JIS A 6513:2017 金属制栅栏和门

Fences and gates with metals

BS 1722-17:2017 栅栏 电气安全围栏规范 设计、安装、维护

Fences. Specification for electric security fences. Design, installation and maintenance

ASTM F1043-17 钢铁工业护栏框架上强度和防护涂层的标准规范

Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

DIN EN 13241:2016 工业、商业、车库门和大门.产品标准,性能特点.德文版本EN 13241-1-2003+A2-2016

Industrial, commercial, garage doors and gates - Product standard, performance characteristics; German version EN 13241:2003+A2:2016

BS 1722-12:2016 栅栏 钢栅栏 制造和安装 规格

Fences. Steel palisade fences. Manufacturing and installation. Specification

EN 13241:2003+A2:2016 工业,商业,车库门和门-产品标准,性能特点

1.1 General - This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard. These devices can be manually or power operated. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3. 1.2 Exclusions - This European Standard does not apply to the following which are intended for a different use: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361; - revolving doors of any size; - railway barriers; - barriers used solely for vehicles. This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition. This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs. This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation. The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive. 1.3 Specific applications - This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door. It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade. When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.

Industrial, commercial, garage doors and gates - Product standard, performance characteristics

ASTM F1043-16a 钢制工业围栏框架上强度和保护涂层的标准规格

1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.) 1.1.1 Caution Regarding Windload—If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered and local wind conditions. 1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

JIS A 6603:2015 钢棚

Steel sheds

IEC 60335-2-95:2011+AMD1:2015 CSV 家用和类似用途电器 安全 第2-95部分 垂直移动车库驱动装置的详细要求 住宅用门

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

IEC 60335-2-95:2011/AMD1:2015 修改件1.家用和类似用途电器.安全.第2-95部分:住宅用垂直移动车库门驱动器的特殊要求

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

JIS A 6604:2015 停车场用金属零部件

Metal components for car port

CSA S413-14:2014 停车设施

1.1 General This Standard specifies special requirements for the durability aspects of the design and construction of new parking structures and parts of buildings subject to vehicular traffic. This includes pedestrian traffic areas adjoining to or contained within parking structures. These include areas such as stairs, and pedestrian bridges from parking structures. 1.2 Structure types New parking structures constructed of structural steel, reinforced concrete (including prestressed concrete), or a combination of these materials fall within the scope of this Standard. 1.3 Repair of existing parking structures This Standard does not cover the repair of existing parking structures, and the provisions of this Standard are not necessarily appropriate for the repair and protection of existing structures. Note: See CSA S448.1 for information on the repair of concrete structures. 1.4 Reference standards In the event of conflict between this Standard and the reference standards, this Standard takes precedence. 1.5 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Parking structures

ASTM F1043-14 钢制工业围栏框架上强度和保护涂层的标准实施规程

1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.) 1.1.1 Caution Regarding Windload—If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered and local wind conditions. 1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

KS B 6873-2013 2层式汽车停车设施

2story type parking facility for automobile

DB34/T 1853-2013 安徽省高速公路服务区建筑设计规范

为更好地做好公路服务区的设计工作，更好地为主体工程做好配套工作特制定本标准。 本标准适用于新建、扩建和改建的高速公路服务区的建筑设计。 高速公路的停车区和公路服务区也可参照本标准进行设计。

Specifications for architectural design of expressway service areas in Anhui Province

DS/EN 12428:2013 工业、商业和车库门 热传导率 计算要求

1.1 GeneralThis European Standard specifies a method for calculating the thermal transmittance of industrial, commercial and garage doors in a closed position.The doors are intended for installation in areas in the reach of people, for which the main inte

Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation