共找到 220 条与 外围建筑物 相关的标准,共 15 页
1.1 This specification covers standard colors for coated chain link fence materials such as chain link fence fabric, tension wire, posts, rails, gate frames, and fittings. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
1.1 This specification covers barbed tape materials and configurations used for security barriers. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Long Barbed Tape Obstacles
1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC, and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.) 1.1.1 Caution Regarding Windload—If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered, and local wind conditions. 1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
1.1 This guide covers the recommended criteria for specifying the various elements of a chain link fence and lists the available choices of components from the current ASTM standards. 1.2 No recommendation is made or implied concerning the merits of any particular product. The choice of product components of the chain link fence should be made by the writers of the project specification, based on their own perception of the merits of the products for the particular application. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Specifying Chain Link Fence
本规程共分8章和2个附录,主要内容包括:总则、术语和符号、材料及制品、.基本规定、建筑设计、结构设计、施工、验收、维护等。
Technical specification for the application of prefabricated lightweight concrete enclosure wall panels
BS EN 13241. Industrial, commercial, garage doors and gates. Product standard, performance characteristics
主要内容包括:总则、术语和符号、基本规定、风荷载、幕墙抗风设计、金属屋面抗风设计、门窗抗风设计、其他围护构造设施抗风设计等。
Design standard for wind resistance of building envelope
BS EN 13241. Industrial, commercial, garage doors and gates. Product standard, performance characteristics
前 言 1 范围 2 规范性引用文件 3 术语和定义 4 基本要求 5 人员与设备 6 巡查 7 运维养护 8 检测与维修 9 档案管理 10 数字化管理
Operation and maintenance management specifications for urban
本标准适用于山东省内新建、改建、扩建道路工程规划范围内城市快速路、主干路、次干路、支路、社会停车场以及城市道路立体交通的绿化设计、施工及养护。
Shandong Province Urban Road Greening Construction Standards
前 言 1 范围 2 规范性引用文件 3 术语和定义 4 设计要求 4.1 一般规定 4.2 防水层 4.3 排(蓄)水层 4.4 隔离过滤层 4.5 种植土层 4.6 园林小品及公用设施 4.7 排灌系统 4.8 其他要求 5 绿化种植 5.1 一般规定 5.2 植物选择原则 5.3 植物配置 6 施工要求 6.1 一般规定 6.2 防水层 6.3 排(蓄)水层 6.4 隔离过滤层 6.5 种植土层和植被层 7 质量验收 7.1 一般规定 7.2 绿化种植质量验收 7.3 排水设施质量验收 7.4 灌溉设施质量验收 8 养护要求 8.1 一般规定 8.2 灌溉 8.3 修剪 8.4 有害生物控制 8.5 土壤改良 8.6 设施维护 8.7 其他
Roof Greening Technical Regulations
1.1 This guide provides the user with a method for testing the watertightness of waterproofing installations applied to horizontal surfaces having a slope not greater than 20 mm/m (2 % slope) (1⁄4 in. per ft). 1.2 This guide is intended for waterproofing installation on parking garages and plaza deck type applications over habitable spaces or on elevated structures, but is not intended for use on building roofing systems. Applicable waterproofing membrane installations that may be tested using this guide are fully adhered or bonded sheet membranes, liquid or fluid-applied membranes, or loose-laid sheet membranes. 1.3 The procedures presented here are not intended for use on those waterproofing installation applications that are for long-term water storage or continuously submerged environments, such as swimming pools, fountains, tank liners with hydrostatic pressure, or water storage units (storage period greater than 48 h). 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Flood Testing Horizontal Waterproofing Installations
本文件规定了电梯使用标志和标识的术语和定义、基本要求、内容和样式、制作、安装和维护。 本文件适用于载人(货)电梯、自动扶梯和自动人行道的标志和标识。
Elevator Use Signs and Signs
Mechanical parking lot (garage) engineering construction specification
主要技术内容包括:总则、术语、基本规定、技术指标、设计、施工要点、工程验收等。
Technical Guidelines for Energy Conservation of High-Performance Building Envelope Structure
Industrial, commercial and garage doors and gates -- Mechanical aspects -- Requirements and test methods
本规程适用于新建、扩建和改建的机械式停车库工程的设计、施工、验收、运维与管理。
Technical specification for mechanical parking garage
主要技术内容包括:总则、术语及符号、基本规定、检测、检测结果评定、养护等。
Technical regulations for inspection and maintenance of steel grid sheds in traffic engineering
"本标准适用于工业用途的既有工业建筑围护结构绿色改造的效果评价。 《标准》为建设单位、使用者、设计人员提供了一种可操作的评价流程,在广泛吸收国外先进标准技术和先进思想的同时,基于目前国内既有工业建筑围护结构现状,也进行全方位评价,包括技术要求、环境影响、成本、社会功能和工程过程控制五个方面。精细化要求可满足社会进步和人民对高质量的要求,适用于新建工业建筑,下一步可扩展至工业与民用建筑。"
Evaluation standard for green refurbishing of existing industrial building envelope
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号