91.090 外围建筑物 标准查询与下载

ASTM F2957-13(2019)e1 装饰用铝栅栏系统的标准规范

1.1 This specification establishes the minimum requirements for architecturally coated, tubular picket, ornamental aluminum fence systems. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Ornamental Aluminum Fence Systems

BS 1722-10:2019 栅栏 链环和焊接网防入侵围栏规范

What is this standard about? This revised British Standard supplies an up-to-date specification for anti-intruder chain link and welded mesh fences and gates. It covers fence materials, their combination and installation.   Who is this standard for? Manufacturers and designers of anti-intruder fence systems and components Installers, fixers and commissioning engineers Specifying authorities and purchasers including national and local government authorities, utilities, commercial and security specifiers Users including: operators, Health & Safety Managers, maintenance personnel Trade associations and reference sources Why should you use this standard? This part of BS 1722 specifies requirements for anti-intruder chain link or welded mesh fences and gates of at least 2.4 m in height for situations that require a higher level of protection than that offered by fences conforming to BS 1722-1 . The standard also includes requirements for the installation of the fencing at the specified location and requirements for protective treatments. It specifies: Concrete and steel posts Struts Steel gates Gate posts Zinc and plastic coated wire and mesh infill The combinations of components available to users NOTE 1: Maintenance requirements for the fence after installation are outside the scope of this standard. NOTE 2: Annex C provides details of the fence requirements and installation site that should be agreed between the fence supplier and purchaser at the time of ordering a fence. However, as conditions vary from site to site, Annex C should not be assumed to be exhaustive.

Fences. Specification for anti-intruder fences in chain link and welded mesh

BS 1722-1:2019 栅栏 勾花网规格

What is this standard about? This revised British Standard supplies an up-to-date specification for chain link fences and the gates and gateposts used with them. Who is this standard for? Manufacturers of chain link fencing systems and components Installers of chain link fencing Specifying authorities and purchasers including utilities, commercial and security specifiers National and local government authorities Trade associations and reference sources General fencing users including: operators, H&S Managers, maintenance personnel Why should you use this standard? Specifying authorities have come to rely on this standard because it provides a well-used, proven and consistent framework for the installation and authorisation of safe and suitable structures for chain link fencing. This updated version specifies safe and effective products and operating regimes in line with other relevant standards and legal requirements. NOTE: BS 1722-1 is also used as a reference document for other standards in the BS 1722 series. What’s changed since the last update? The 2019 edition reflects that the technology of producing wire and wire mesh has changed, as have post materials – concrete, timber and galvanised steel. In addition the revision reflects changes to methods of manufacture and construction, installation, commissioning techniques, and safety requirements.

Fences. Specification for chain link fences

T/CECS 555-2018 《薄型陶瓷饰面保温装饰板 应用技术规程》

本规程共分7章，主要技术内容包括：总则、术语、基本规定、材料与系统、构造与设计、施工和质量验收。

Technical specification for application of thermal insulation decorative panel with thin ceramic

BS 1722-5:2006+A1:2018 栅栏 封闭式栅栏和木栅栏规范

What is BS 1722-5 - Specification for close-boarded fences and wooden palisade fences about?   BS 1722-5 is the fifth part of BS 1722 that specifies requirements for close-boarded and wooden palisade fences. It includes requirements for the installation of the fencing at the specified location.    BS 1722-5 specifies requirements for protective treatments. However, maintenance, which is an important aspect of extending the service life of the fence, is outside the scope of this standard.    BS 1722-5 includes requirements for sizes of components, together with the permissible tolerances on size. These are minimum requirements and it will normally be acceptable to use larger sizes, except if this could adversely affect the fitting of components or if replacement parts are required to match with those already present.   Who is BS 1722-5- Specification for close-boarded fences and wooden palisade fences for?    BS 1722-5

Fences - Specification for close-boarded fences and wooden palisade fences

BS 1722-11:2006+A1:2018 栅栏 预制木板栅栏规范

1   Scope This part of BS 1722 specifies requirements for the materials, design, construction and installation of prefabricated wood panel fences constructed from softwood panels fixed between timber or concrete posts. This standard does not cover fences of a height greater than 2 m above ground level. This standard includes requirements for protective treatments. However, maintenance requirements of the fence after installation are outside the scope of this standard. It specifies requirements for the components that make up a fence and the way in which the fence should be constructed. The standard includes requirements for component dimensions, together with the permissible tolerances on size. These are minimum requirements and it will normally be acceptable to use larger sizes, except if this could adversely affect the fitting of components or if replacement parts are required to match with those already present. NOTE 1 Prefabricated wood panel fences are suitable for housing, for dividing boundaries and for visual screens. They are not suitable for fencing which is exposed to animal or personnel loading. They are also not suitable for some very exposed areas such as headlands and high hills liable to abnormally high winds. NOTE 2 Annex A lists items that should be agreed between the fence supplier and the purchaser.

Fences - Specification for prefabricated wood panel fences

BS 1722-7:2006+A1:2018 栅栏 木柱和铁栅栏规范

1   Scope This part of BS 1722 specifies requirements for wooden post and rail fences, using both sawn and cleft components. It includes requirements for the installation of the fencing at the specified location.

Fences - Specification for wooden post and rail fences

ASTM F1908-08(2018) 住宅室外游泳池、热水浴缸和水疗中心用栅栏的标准指南

1.1 This guide provides recommended minimum requirements for various types of fences for residential outdoor swimming pools, hot tubs, and spas. 1.2 The values stated in inch-pound units are to be regarded as standard. The values stated in parentheses are for information only. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

ASTM F2548-12(2018) 安全用途的钢板网系统的标准规范

Standard Specification for Expanded Metal Fence Systems for Security Purposes

ASTM F1910-98(2018) 长刺带障碍物的标准规范

Standard Specification for Long Barbed Tape Obstacles

ASTM F3000/F3000M-13(2018) 标准规格聚合物保密插入板条链链接织物和隐私链链接织物制造包含预安装隐私板条

Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

BS 5709:2018 间隙、大门和栅栏 规格

1   Scope This British Standard specifies field-measurable performance requirements for new gaps , gates and stiles for footpaths , bridleways, restricted byways and other routes used by the public. It can also be used for structures to be installed on permissive paths , wholly private ways and on commons. It includes a hierarchy of accessibility performance requirements to raise awareness of the characteristics of different structures . It does not attempt to provide performance requirements in relation to land management need, to be individually assessed according to the circumstances. It can be used to establish and maintain a quality in all new structures that represents good practice. This British Standard does not automatically apply retrospectively to most existing structures . It can be used as guidance for those who wish to repair or improve existing structures . This British Standard does not allocate decision making, installation, maintenance or record keeping to any particular organization or person. This British Standard is intended to be used by: a) those planning, specifying or authorizing new structures on paths (e.g. highway authorities, highways agencies, district councils, landowners, tenants, user groups and others handling diversions, creations or dedications of paths subject to gaps , gates and

Gaps, gates and stiles. Specification

ASTM F1043-18 金属工业链栅栏框架的强度和保护涂层的标准规范

1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC, and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.) 1.1.1 Caution Regarding Windload—If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered, and local wind conditions. 1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework

IEC 60335-2-95:2011+AMD1:2015+AMD2:2017 CSV 家用和类似用途电器.安全.第2-95部分:住宅用垂直移动车库门驱动器的特殊要求

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

IEC 60335-2-95:2011/AMD2:2017 家用和类似用途电器.安全.第2-95部分:住宅用垂直移动车库门驱动器的特殊要求

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

T/CECS 480-2017 发泡陶瓷保温板应用技术规程

主要技术内容是：总则、术语、基本规定、材料、设计与构造、施工和质量验收。 

Technical specification for application of foamed ceramic thermal insulation board

T/CECS 475-2017 石材饰面保温装饰板外墙外保温工程技术规程

主要内容包括：总则、术语、基本规定、系统构造与性能、设计、施工及验收等。

Technical specification for external thermal insulation engineering of stone veneer decorative board

DB11/ 693-2017 建设工程临建房屋技术标准

Technical Standards for Temporary Buildings in Construction Projects

T/CECS 469-2017 建筑与小区低影响开发技术规程

总则、术语、策划、设计、施工与验收、维护管理

Technical specification for LID in building and sub-district

ASTM F654-07(2017) 住宅连锁围栏门标准规范

1.1 This specification covers detail requirements for residential chain link fence gates, gate posts, and accessories. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Residential Chain Link Fence Gates