81.100 玻璃和陶瓷生产设备 标准查询与下载

DS/EN 13035-5+A1:2010 平板玻璃制造、处理和加工的机器和设备 安全要求 第5部分：堆垛和卸垛的机器和装置

This European Standard applies for machines and installations for stacking and de-stacking that are specifically de-signed for building-up or taking down upright stacks of flat glass sheet by sheet including unloading and loading of single sheets of flat glass from or onto machines or transport devices (conveyors).NOTE For sketches with examples of typical constructions, see Annex A (informative), Figures A.1 to A.9.1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines and installations for stacking and de-stacking flat glass when they are used as intended and under the conditions of misuse which

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

DS/EN 13035-6+A1:2010 平板玻璃制造、处理和加工的机器和设备 安全要求 第6部分：开孔机

This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass.1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines for the break-out of flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out

EN 13035-9:2006+A1:2010 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台第5部分:堆垛和堆垛机和装置.第9部分:洗涤装置

This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary. This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. This European Standard is not applicable to glass washing installations for automotive and bent glass. This European Standard is not applicable to water preparation and disposal of waste washing liquid. This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

DS/EN 13035-7+A1:2010 平板玻璃制造、处理和加工的机器和设备-安全要求-第7部分：夹层玻璃切割机

1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation.1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measure

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

DIN EN 13035-3:2010 平板玻璃的制造、处理和加工用机械和设备.安全性要求.第3部分:切割机械.德文版本EN 13035-3-2003+A1-2009

This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines; German version EN 13035-3:2003+A1:2009

LST EN 13367-2005+A1-2009/AC-2010 陶瓷机器 安全 转移平台和汽车

Ceramic machines - Safety - Transfer platforms and cars

LST EN 13042-3-2007+A1-2010 制造、处理和加工中空玻璃的机器和设备-安全要求-第3部分：IS 机器

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

LST EN 13042-1-2007+A1-2010 中空玻璃制造、处理和加工的机器和设备-安全要求-第1部分：料滴加料器

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

LST EN 13042-2-2004+A1-2010 制造、处理和加工中空玻璃的机器和设备-安全要求-第2部分：上料搬运机械

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

LST EN 13042-5-2004+A1-2010 制造、处理和加工中空玻璃的机器和设备-安全要求-第5部分：压力机

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

LST EN 13035-3-2003+A1-2010 平板玻璃制造、处理和加工的机器和设备 安全要求 第3部分：切割机

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

DS/EN 13042-1+A1:2010 中空玻璃制造、处理和加工的机器和设备-安全要求-第1部分：料滴加料器

1.1 This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs.1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, operation and maintenance.1.3 This European Standard does not deal with bowl firing.1.4 This European Standard is not applicable to gob feed

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

DS/EN 13367+A1/AC:2009 陶瓷机器 安全 转移平台和汽车

This European Standard applies for the design, installation and commissioning of transfer platforms and cars and ancillary devices for the process related transport of ceramic material on rails. The rails, which are considered to be horizontal and the movement of vehicles in equipment and machinery connected with the process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered.1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, when they are used as intended and under the conditions foreseen by the manufacturer (s

Ceramic machines - Safety - Transfer platforms and cars

DIN EN 13042-2:2009 空心玻璃制造,处理和加工用机械和设备.安全要求.第2部分:给料用搬运机械,德文版本EN 13042-2:2004+A1:2009

This standard contains the requirements for safety for the design and installation of handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or forming machine for hollow glass. This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding; German version EN 13042-2:2004+A1:2009

DIN EN 13042-5:2009 中空玻璃的制造,处理和加工用机械和设备.安全要求.第5部分:压力机.德文版本EN 13042-5-2003+A1-52009

This European Standard contains the requirements for safety for the design and installation of glass presses from the feeding of the gob after shearing up to and including the take-out mechanism as far as this is part of the press. This European Standard deals with all significant hazards pertinent to glass presses when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce the risks arising from the significant hazards.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses; German version EN 13042-5:2003+A1:2009

EN 13035-7:2006+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台第5部分:堆垛和堆垛机和装置.第7部分:夹层玻璃的切割机

This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions of mis- use which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant. This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

EN 13035-4:2003+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台

This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or - supported at the lower edge - leaning against a supporting surface. This standard deals with all significant hazards, hazardous situations and events relevant to tilting tables for flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Noise is not a significant hazard for this type of machines. This standard is not applicable to tilting tables where all movements are done by human power. This standard is not applicable to additional equipment, e. g. for cutting (see EN 13035-3), loading and unloading (see EN 13035-5), break-out (see EN 13035-6), transporting (see EN 619) of flat glass as used as integral parts of the machinery. If there are specific risks that arise in connection with tilting tables, appropriate measures are specified. This document is not applicable to tilting tables which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

EN 13035-5:2006+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台第5部分:堆垛和堆垛机和装置

This European Standard applies for machines and installations for stacking and de-stacking that are specifically designed for building-up or taking down upright stacks of flat glass sheet by sheet including unloading and loading of single sheets of flat glass from or onto machines or transport devices (conveyors). NOTE For sketches with examples of typical constructions, see Annex A (informative), Figures A.1 to A.9. This European Standard deals with the significant hazards, hazardous situations and events relevant to machines and installations for stacking and de-stacking flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This European Standard is not applicable to the significant hazards of conveyors and other machines for the manufacture, treatment and processing of flat glass, e. g. tilting tables, equipment for storage of flat glass, such as stillages. If there are specific hazards which arise by the co-operation of this machinery and equipment with machines and installations for stacking and de-stacking, appropriate measures are specified. This European Standard is not applicable to building up or taking down stacks by means of cranes that are temporarily equipped via hook with load-lifting attachments with suction cups to lift flat glass. When compiling this European Standard, it was assumed that lifting movements are only used as part of full automatic machines and that the related hazards are not significant. This European Standard is not applicable to machines and installations for stacking and de-stacking which are manufactured before the date of publication of this European Standard by CEN. Noise is not a significant hazard for this type of machinery. The A-weighted emission sound pressure level at workstations does not exceed 70 dB(A).

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

EN 13042-1:2007+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第1部分:滴料机

This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not a significant hazard for this type of machine. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This European Standard does not deal with bowl firing. This European Standard is not applicable to gob feeders which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

DS/EN 13042-3+A1:2009 制造、处理和加工中空玻璃的机器和设备-安全要求-第3部分：IS 机器

1.1 This European Standard applies to the design and installation of IS machines including the gob distributor and machine conveyor.1.2 ! This European Standard deals with the significant hazards, hazardous situations and events relevant to IS machines, when they are used as intended and under the conditions of misuse which are reasonably foresee-able by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance.""""1.3 This European Standard does not deal with gob feeders (see EN 13042-1) and handling machi

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines